首页> 外文期刊>Journal of Hydraulic Engineering >Influence of Toe Clearance on Propeller Scour around an Open-Type Quay
【24h】

Influence of Toe Clearance on Propeller Scour around an Open-Type Quay

机译:脚趾间隙对开放式码头周围螺旋桨冲刷的影响

获取原文
获取原文并翻译 | 示例
           

摘要

This study experimentally investigates the temporal and spatial development of the scour hole induced by a confined propeller jet in the presence of an open type quay. The longitudinal distance between the propeller face and toe of the quay slope, i.e.,toe clearance, was systematically varied to examine its influence on the scour hole development under different test conditions. The scour depth along the centerline of the propeller axis was measured at predetermined time intervals and the three-dimensional scour profile was obtained at the end of each test when the asymptotic state was reached. The asymptotic centerline profiles at varying toe clearances, which were compared with published unconfined propeller scour data, show that evolution of the scour hole is significantly influenced by the toe clearance. The asymptotic scour profiles that formed at different toe clearances were classified into three types with reference to the toe clearance field in the vicinity of the slope toe, namely the near toe clearance, intermediate toe clearance and far toe clearance fields. Two scouring mechanisms, namely jet diffusion and quay obstruction, were found to govern the scouring process and dictate whether the scour hole forms in any one of these three fields. The influence of these two mechanisms on the development of the scour characteristic dimensions in each field were also investigated based on which quantitative demarcations among the fields were obtained. (C) 2017 American Society of Civil Engineers.
机译:这项研究实验研究了在开放式码头存在的情况下,密闭螺旋桨射流引起的冲刷孔的时空发展。系统地改变了螺旋桨面与码头坡度脚趾之间的纵向距离(即脚趾间隙),以检查其对不同试验条件下冲刷孔发展的影响。以预定的时间间隔测量沿螺旋桨轴中心线的冲刷深度,并在达到渐近状态时在每次测试结束时获得三维冲刷轮廓。将脚趾间隙变化时的渐近中心线轮廓与已发布的无限制螺旋桨冲刷数据进行比较,表明冲刺孔的演变受脚趾间隙的影响很大。参照倾斜脚趾附近的脚趾间隙场,将在不同的脚趾间隙形成的渐近冲刷轮廓分为三种类型,即近脚趾间隙,中间脚趾间隙和远脚趾间隙场。发现了两种冲刷机制,即射流扩散和码头阻塞,控制冲刷过程,并决定在这三个字段中的任何一个中是否形成冲刷孔。在获得田间定量分界的基础上,还研究了这两种机理对每个田间冲刷特征尺度发展的影响。 (C)2017年美国土木工程师学会。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号