首页> 外文期刊>Journal of food protection >Risk Analysis Of Listeria Spp. Contamination In Two Types Of Ready-to-eat Chicken Meat Products
【24h】

Risk Analysis Of Listeria Spp. Contamination In Two Types Of Ready-to-eat Chicken Meat Products

机译:李斯特菌的风险分析。两种即食鸡肉产品中的污染

获取原文
获取原文并翻译 | 示例
           

摘要

This study was conducted to determine the risk of Listeria contamination in frozen ready-to-eat roasted and steamed chicken meat in a chicken plant in Thailand. Environmental surfaces were divided into three zones. Zone 1 included surfaces in direct contact with products. Zones 2 and 3 included indirect contact surfaces; zone 2 was next to zone 1, and zone 3 was located next to zone 2 and relatively far from the product. A mathematical model for the probability of product contamination after contact with contaminated zone 1 surfaces was established. This model was augmented by an already established model for the probability of Listeria contamination on zone 1 surfaces. Sensitivity analysis revealed that the prevalence of Listeria on zone 1 surfaces before cleaning and sanitizing, production time, and concentration and contact time of sanitizer were correlated with contamination of both products. Alternative risk management measures for reducing the risk of Listeria contamination were developed using sanitizer concentrations of 0.25 to 1.25% (vol/vol), sanitizer contact times of 5 to 20 min, and production times of 5 to 20 h. The plant's risk manager chose a 0.25% (vol/vol) sanitizer concentration, a contact time of 20 min, and a production time of 20 h. After implementation of the selected risk management option, the prevalence of Listeria on roasted and steamed products was reduced by 2.19 and 2.01%, respectively. The prevalence of Listeria in zones 1, 2, and 3 was also reduced by 3.13, 11.24, and 25.66%, respectively.
机译:这项研究的目的是确定泰国一家鸡肉工厂中即食的冷冻烤制和蒸制鸡肉中李斯特菌污染的风险。环境表面分为三个区域。 1区包括与产品直接接触的表面。 2区和3区包括间接接触面;区域2紧邻区域1,区域3紧邻区域2且距离产品较远。建立了与污染的1区表面接触后产品污染可能性的数学模型。通过已经建立的1区表面李斯特菌污染可能性的模型,该模型得到了增强。敏感性分析表明,在清洁和消毒之前1区表面上的李斯特菌的流行,生产时间,消毒剂的浓度和接触时间与两种产品的污染有关。使用0.25至1.25%(体积/体积)的消毒剂浓度,5至20分钟的消毒剂接触时间和5至20小时的生产时间,开发了用于降低李斯特菌污染风险的替代风险管理措施。工厂的风险经理选择浓度为0.25%(vol / vol)的消毒剂,接触时间为20分钟,生产时间为20小时。实施选定的风险管理选项后,烘焙和蒸煮产品中李斯特菌的患病率分别降低了2.19%和2.01%。 1区,2区和3区李斯特菌的患病率也分别降低了3.13%,11.24%和25.66%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号