首页> 外文期刊>Journal of Electronic Materials >Study of LWIR and VLWIR Focal Plane Array Developments: Comparison Between p-on-n and Different n-on-p Technologies on LPE HgCdTe
【24h】

Study of LWIR and VLWIR Focal Plane Array Developments: Comparison Between p-on-n and Different n-on-p Technologies on LPE HgCdTe

机译:LWIR和VLWIR焦平面阵列开发研究:在LPE HgCdTe上p-on-n技术与不同n-on-p技术的比较

获取原文
获取原文并翻译 | 示例
           

摘要

The very long infrared wavelength (>14 μm) is a very challenging range for the design of mercury cadmium telluride (HgCdTe) large focal plane arrays (FPAs). The need (mainly expressed by the space industry) for very long wave FPAs appears very difficult to fulfil. High homogeneity, low defect rate, high quantum efficiency, low dark current, and low excess noise are required. Indeed, for such wavelength, the corresponding HgCdTe gap becomes smaller than 100 meV and each step from the metallurgy to the technology becomes critical. This paper aims at presenting a status of long and very long wave FPAs developments at DEFIR (LETI-LIR/Sofradir joint venture). This study will focus on results obtained in our laboratory for three different ion implanted technologies: n-on-p mercury vacancies doped technology, n-on-p extrinsic doped technology, and p-on-n arsenic on indium technology. Special focus is given to 15 μm cutoff n/p FPA fabricated in our laboratory demonstrating high uniformity, diffusion and shot noise limited photodiodes at 50 K.
机译:对于设计碲化汞镉(HgCdTe)大焦平面阵列(FPA)而言,非常长的红外波长(> 14μm)是一个非常具有挑战性的范围。长波FPA的需求(主要由航天工业表示)似乎很难实现。需要高均质性,低缺陷率,高量子效率,低暗电流和低过量噪声。实际上,对于这样的波长,相应的HgCdTe间隙变得小于100 meV,并且从冶金到技术的每个步骤都变得至关重要。本文旨在介绍DEFIR(LETI-LIR / Sofradir合资企业)长期和长期FPA的发展状况。这项研究的重点是在我们的实验室中针对三种不同的离子注入技术获得的结果:n-p上的汞空位掺杂技术,n-p上的非本征掺杂技术和p-n上的铟铟技术。我们实验室特别制作了15μm截止n / p FPA,展示了在50 K时具有高均匀性,扩散性和散粒噪声限制的光电二极管。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号