Control over Surrounding Rocks Deformation of Soft Floor and Whole-Coal Gateways with Trapezoidal Supports

摘要

In Gengcun Colliery, Yima Coal Group Co. Ltd. the characteristics of the gateways of thick coal seam and the coal seam is with fully mechanized sublevel caving mining are that the thickness of roof coal seam of gateways is larger, their surrounding rocks are the whole-coal mass and the coal seam is prone to Spontaneous Combustion. With the natural equilibrium arch theory, the reasonable adjacent distance of No. 11 mine-type metal supports was calculated in trapezoidal gateways based on these characteristics. Then, in-situ supporting experiments were carried out. The results indicate that under the action of virgin rock stress, the width of broken rocks zone of surrounding rocks is 1.7-20 m in return heading and 1.1-1.3 m in going headway. And their surrounding rocks belong to the Ⅳ-type soften rock and the Ⅲ-type common surrounding rock respectively. Therefore, under the movable abutment pressure, the gateways deformation is serious. It is suggested that the designed gateways have to use pre-broadened cross section to suit their deformation. At the same time, the accumulated water on gateway floor must be drained in time. These measures were taken in the 1302 and 1304 coal faces in Gengcun Colliery, and the satisfactory results have been obtained.