首页> 外文期刊>Journal of Analytical & Applied Pyrolysis >Thermal decomposition of poly(propylene sebacate) and poly(propylene azelate) biodegradable polyesters: Evaluation of mechanisms using TGA, FTIR and GC/MS
【24h】

Thermal decomposition of poly(propylene sebacate) and poly(propylene azelate) biodegradable polyesters: Evaluation of mechanisms using TGA, FTIR and GC/MS

机译:聚癸二酸丙二酯和壬二酸丙二酯可生物降解聚酯的热分解:使用TGA,FTIR和GC / MS评估机理

获取原文
获取原文并翻译 | 示例
           

摘要

The synthesis, characterization and thermal behavior of two biodegradable aliphatic polyesters poly(propylene azelate) (PPAz) and poly(propylene sebacate) (PPSeb) are described in the present work. The thermal degradation of both polyesters was studied using thermogravimetric analysis (TG) by the determination of their mass losses during heating. From the thermogravimetric curves it can be seen that both polyesters are thermally stable materials since PPAz has its highest decomposition rate at 411.3 while PPSeb at 413.6 C From the variation of activation energy (E) with increasing degree of con-version it is found that the polyester's decomposition proceeds with a complex reaction mechanism with the participation of at least two different mechanisms. To evaluate these mechanisms the TG, FTIR and a combination of TG-gas chromatography-mass spectrometry (TG/GC-MS) methods were used. From mass ions detection of formed decomposition compounds, it was found that the decomposition of both polymers takes place, mainly, through β-hydrogen bond scission and secondarily through a-hydrogen bond scission. The main decomposition products are aldehydes, alcohols, allyl, diallyl, and carboxylic acids.
机译:在本工作中描述了两种可生物降解的脂族聚酯聚壬二酸丙二酯(PPAz)和癸二酸丙二酯(PPSeb)的合成,表征和热行为。通过热重分析(TG)通过测定加热期间的质量损失来研究两种聚酯的热降解。从热重曲线可以看出,这两种聚酯都是热稳定的材料,因为PPAz在411.3时具有最高的分解速率,而PPSeb在413.6 C时具有最高的分解率。聚酯的分解是通过复杂的反应机理进行的,其中至少有两种不同的机理参与其中。为了评估这些机制,使用了TG,FTIR和TG-气相色谱-质谱(TG / GC-MS)方法的组合。从形成的分解化合物的质量离子检测中发现,两种聚合物的分解主要通过β-氢键断裂,其次通过α-氢键断裂而发生。主要的分解产物是醛,醇,烯丙基,二烯丙基和羧酸。

著录项

  • 来源
    《Journal of Analytical & Applied Pyrolysis》 |2011年第1期|p.123-130|共8页
  • 作者单位

    Solid State Physics Section, Physics Department, Aristotle University of Thessaloniki. GR-541 24 Thessaloniki, Macedonia, Greece;

    Solid State Physics Section, Physics Department, Aristotle University of Thessaloniki. GR-541 24 Thessaloniki, Macedonia, Greece;

    Laboratory of Polymer Chemistry and Technology, Department of Chemistry, Aristotle University ofThessaloniki, GR-541 24 Thessaloniki, Macedonia, Greece;

    Laboratory of Polymer Chemistry and Technology, Department of Chemistry, Aristotle University ofThessaloniki, GR-541 24 Thessaloniki, Macedonia, Greece;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Poly(propylene sebacate); Poly(propylene azelate); Aliphatic polyesters; Thermal degradation; Decomposition mechanism;

    机译:聚癸二酸丙二酯;聚(壬二酸丙烯酯);脂肪族聚酯;热降解;分解机制;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号