NOx formation in post-flame gases from syngas/air combustion at atmospheric pressure

摘要

Species concentration measurements specifically those associated with nitrogen oxides (NOx) can act as important validation targets for developing kinetic models to predict NOx emissions under syngas combustion accurately. In the present study, premixed combustion of syngas/air mixtures, with equivalence ratio (Phi) from 0.5 to 1.0 and H-2/CO ratio from 0.25 to 1.0 was conducted in a McKenna burner operating at atmospheric pressure. Temperature and NOx concentrations were measured in the post-combustion zone. For a given H-2/CO ratio, increasing the equivalence ratio from lean to stoichiometric resulted in an increase in NO and decrease in NO2 concentration near the flame. Increasing the H-2/CO ratio led to a decrease in the temperature as well as the NO concentration near the flame. Based on the axial profiles above the burner, NO concentration increases right above the flame while NO2 concentration decreases through NO2-NO conversion reactions according to the path flux analysis. In addition, the present experiments were operated in the laminar region where multidimensional transport effects play significant roles. In order to account for the radial and axial diffusive and convective coupling to chemical kinetics in laminar flow, a multidimensional model was developed to simulate the post-combustion species and temperature distribution. The measurements were compared against both multidimensional computational fluid dynamics (CFD) simulations and one-dimensional burner stabilized flame simulations. The multidimensional model predictions resulted in a better agreement with the measurements, clearly highlighting the effect of multidimensional transport. (C) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.