首页> 外文期刊>International journal of hydrogen energy >Metal sulfate decomposition using green Pd-based catalysts supported on yAl_2O_3 and SiC: A common step in sulfur-family thermochemical cycles
【24h】

Metal sulfate decomposition using green Pd-based catalysts supported on yAl_2O_3 and SiC: A common step in sulfur-family thermochemical cycles

机译:使用yAl_2O_3和SiC负载的绿色Pd基催化剂分解金属硫酸盐:硫族热化学循环中的常见步骤

获取原文
获取原文并翻译 | 示例
           

摘要

Thermochemical water splitting cycles (TWSCs) are processes with the potential for large-scale production of carbon-free hydrogen. Among these, the sulfur-family thermochemical cycles are considered the most promising due to both, the use of readily affordable chemical reagents and the temperature required to thermally decompose oxygenated sulfur compounds, which is achievable by solar means. Indeed, solar heat assisted metal sulfate decomposition is a key step, where catalysis can be employed to reduce decomposition temperature. Here we present a green route to synthesize Ag-Pd and Fe-Pd intermetallic alloy catalysts supported over gamma-Al2O3 and Si-C by a microwave-assisted method using glycerol both as a solvent and as a reducing and stabilizing agent. The obtained supported catalysts were physicochemically characterized. Fe-Pd/Al2O3 catalyst exhibited the best performance, abating the zinc sulfate decomposition temperature by ca. 85 degrees C in comparison with other reported catalysts. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
机译:热化学分水循环(TWSC)是具有大规模生产无碳氢的潜力的过程。在这些方法中,硫族热化学循环被认为是最有前途的,这是由于既使用了价格适中的化学试剂,又通过热分解可以实现氧化分解含硫化合物所需的温度。实际上,太阳热辅助的金属硫酸盐分解是关键步骤,其中可以采用催化作用来降低分解温度。在这里,我们提出了一种绿色路线,通过微波辅助方法,同时使用甘油作为溶剂以及还原和稳定剂,来合成负载在γ-Al2O3和Si-C上的Ag-Pd和Fe-Pd金属间合金催化剂。对获得的载体催化剂进行了物理化学表征。 Fe-Pd / Al2O3催化剂表现出最好的性能,使硫酸锌的分解温度降低了约20%。与其他报道的催化剂相比,温度为85摄氏度。 (C)2018氢能出版物有限公司。由Elsevier Ltd.出版。保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号