Determination Of Mineral And Trace Element Concentrations In Pine Needles By Icp-oes: Evaluation Of Different Sample Pre-treatment Methods

摘要

In the present study, the determination of mineral and trace elements (Al, B, Ca, Cu, Fe, K, Mg, Mn, Na, P and Zn) from pine needles using three sample pre-treatment methods followed by inductively coupled plasma optical emission spectrometry, was examined. Sample pre-treatment methods tested were microwave digestion, ultrasound-assisted digestion and dry ashing. The new ultrasound-assisted digestion method was optimised by the analysis of the standard reference material (SRM) 1575a (pine needles) sample. The speed of dry ashing method was significantly increased by ultrasound dissolution after ashing. All the ICP-OES measurements were performed in robust plasma conditions which were tested by measuring the Mg II 280.270 nm/Mg I 285.213 nm line intensity ratios. The microwave digestion resulted generally in slightly higher element concentrations than ultrasound-assisted digestion. B, Cu and Na resulted in such low concentrations that they could not be accurately determined by using the microwave digestion method. The t-tests found no significant differences between the certified and the determined element concentrations of the SRM 1575a using the dry ashing method followed with ultrasound dissolution.