首页> 外文期刊>International journal of design & nature and ecodynamics >VARIATION IN TOOTH CROWN SIZE AND SHAPE ARE OUTCOMES OF THE COMPLEX ADAPTIVE SYSTEM ASSOCIATED WITH THE TOOTH NUMBER VARIATION OF HYPODONTIA
【24h】

VARIATION IN TOOTH CROWN SIZE AND SHAPE ARE OUTCOMES OF THE COMPLEX ADAPTIVE SYSTEM ASSOCIATED WITH THE TOOTH NUMBER VARIATION OF HYPODONTIA

机译:齿冠大小和形状的变化是与牙齿矫正器齿数变化相关的复杂自适应系统的结果

获取原文
获取原文并翻译 | 示例
           

摘要

The development of the dentition is a good model of general development. it has the general characteristics of a complex adaptive system. The developmental variation of hypodontia presents with a reduced number of teeth with several other phenotypic changes. The teeth formed are smaller in size, have different crown and root morphology and are delayed in development. The present study is a component of a multi-centre and multidisciplinary collaborative study to investigate hypodontia from genotype to phenotype. This study uses enhanced 3D-imaging techniques in order to increase the range of parameters of the phenotypic outcome: tooth size and tooth shape. The sample consists of orthodontic patients. 60 with hypodontia (30 males and 30 females), and 60 controls matched for age. sex and ethnicity. The material studied for these measurements are the dental models of each patient: these have been imaged with an Amann Girrbach Ceramill Map400 3D scanner. The 3D images produced were all taken by one operator and viewed on MeshLab. The accuracy of the trieasurements taken was determined through repeat measurements of the same images, undertaken to determine intra and inter-operator reproducibility. This new system was validated by repeating these measurements using the standard 2D caliper technique. Ten repeat measurements were taken on ten models of the lower and upper premolar inter-cuspal distances. The average intra-operator reproducibility for the inter-cuspal distances when measuring the distance between the buccal and palatal cusp of the maxillary premolar was 0.20 mm; the mandibular premolar was 0.32 mm. The results for inter-operator reproducibility demonstrate an average difference of 0.24 mm for the maxillary premolar and 0.16 mm for the lower premolar. This novel method provides an increased range of measurements with good levels of accuracy. This study will go on to establish the variations on the 3D images between the hypodontia and the control group.
机译:牙列的发展是总体发展的良好模式。它具有复杂的自适应系统的一般特征。牙龈发育不良的表现是牙齿数量减少以及其他一些表型变化。形成的牙齿尺寸较小,具有不同的冠和根形态,并且发育迟缓。本研究是一项多中心和多学科合作研究的组成部分,旨在研究从基因型到表型的牙髓病。这项研究使用增强型3D成像技术,以增加表型结果参数的范围:牙齿大小和牙齿形状。样本由正畸患者组成。 60例患有牙列炎(男性30例,女性30例),另有60例对照者年龄相符。性别和种族。用于这些测量的研究材料是每位患者的牙齿模型:这些已使用Amann Girrbach Ceramill Map400 3D扫描仪成像。生成的3D图像全部由一位操作员拍摄并在MeshLab上查看。通过重复测量相同的图像来确定所进行的三度测量的准确性,以确定操作者内部和操作者之间的可重复性。通过使用标准2D卡尺技术重复这些测量来验证此新系统。在上下前磨牙间距离的十个模型上进行十次重复测量。当测量上颌前磨牙的颊和pa尖之间的距离时,操作者内部的平均可再现性为0.20 mm;下颌前磨牙为0.32 mm。操作者之间可重复性的结果表明,上颌前磨牙的平均差异为0.24 mm,下颌前磨牙的平均差异为0.16 mm。这种新颖的方法可以提高测量范围,并具有良好的准确性。这项研究将继续建立3D图像在牙髓炎和对照组之间的差异。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号