...
首页> 外文期刊>International communications in heat and mass transfer >Generalized optimization of cross-flow staggered tube banks using a subscale model
【24h】

Generalized optimization of cross-flow staggered tube banks using a subscale model

机译:使用子尺度模型对错流交错管束进行广义优化

获取原文
获取原文并翻译 | 示例
           

摘要

Finding a general optimum arrangement of the cross-flow staggered tube banks causes a significant decrease in using available energy resources due to their extensive use in industrial applications. This paper presents a numerical optimization study by generalized pattern search algorithm (GPSA) to investigate optimum longitudinal and transverse pitches of the staggered tube banks in turbulent flow regime. Symmetric and periodic boundary conditions are employed to simulate all the tube banks without considering the entire volume. Using these boundary conditions, the optimization process can be directly performed by simulating the flow and heat transfer through tube banks with a CFD code and the previous researchers' correlations are not employed in this process. The "goodness factor" which takes into consideration the effects of both heat transfer and pressure drop simultaneously in a proper order is used as the objective function. In the first part of the study, optimum pitches are calculated for specific inlet Reynolds and Prandtl numbers. Subsequently, the effect of both inlet Reynolds and Prandtl numbers are separately investigated on the optimum pitches in the turbulent regime. Results show that the optimum dimensionless longitudinal and transverse pitches of the staggered tube banks are independent of the inlet Reynolds and Prandtl numbers in the turbulent regime and equal to P-L,P- opt congruent to 1 and P-T,P- opt congruent to 1.3, respectively. As a result, a general compact arrangement for staggered tube banks is proposed that is applicable in practical applications due to its high efficiency and compactness.
机译:由于错流交错管束在工业应用中的广泛使用,找到这种错流交错管束的一般最佳布置会导致可利用能源的使用显着减少。本文提出了一种基于广义模式搜索算法(GPSA)的数值优化研究,以研究在紊流状态下交错管束的最佳纵向和横向螺距。采用对称和周期性边界条件来模拟所有管束,而无需考虑整个体积。使用这些边界条件,可以通过使用CFD代码模拟通过管束的流动和传热来直接执行优化过程,并且在此过程中未使用以前的研究人员的相关性。以适当顺序同时考虑传热和压降影响的“优因数”用作目标函数。在研究的第一部分中,针对特定的入口雷诺数和普朗特数计算最佳螺距。随后,在湍流状态下,分别研究了进气雷诺数和普朗特数对最佳螺距的影响。结果表明,在紊流状态下,交错管束的最佳无量纲纵向和横向节距与进口雷诺数和普朗特数无关,分别等于PL,P-opt等于1和PT,P-opt等于1.3。 。结果,提出了一种用于交错管束的通用紧凑布置,由于其高效和紧凑而适用于实际应用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号