首页> 外文期刊>IEEE Journal of Quantum Electronics >Novel technique for the systematic measurement of gain, absolute refractive index spectra, and other parameters of semiconductor lasers
【24h】

Novel technique for the systematic measurement of gain, absolute refractive index spectra, and other parameters of semiconductor lasers

机译:系统测量半导体激光器的增益,绝对折射率谱和其他参数的新技术

获取原文
获取原文并翻译 | 示例
           

摘要

To characterize semiconductor lasers, it is often required to measure parameters such as the quasi Fermi-level separation, intrinsic optical loss, the position of the gain peak, and gain and absolute refractive index spectra. For these measurements, there are many different techniques available, but they neglect to take into account the dispersion of refractive index and cannot be used to extract the absolute refractive index spectrum. A novel technique is proposed to systematically and accurately measure all these parameters of semiconductor lasers. Compared with techniques often used, which will be briefly reviewed in the paper, this novel technique has the following advantages: (1) the determination process uses only the measured spontaneous emission spectra, without the requirement for knowledge of such parameters as intrinsic optical loss, facet reflectivity, and waveguide confinement factor, which presently are difficult to check experimentally; (2) results are obtained for each given current (for example, this technique measures intrinsic optical loss for each given current, rather than the average one over the whole current range); (3) the dispersion of refractive index is taken into account; (4) both the absolute refractive index spectrum for a given current and its change with current can be accurately measured; (5) the gain spectra and refractive index can be measured as wide as one wants; (6) the measurement accuracy is improved; and (7) no adjustable parameter or recalibration is needed.
机译:为了表征半导体激光器,通常需要测量一些参数,例如准费米能级分离,固有光学损耗,增益峰值的位置以及增益和绝对折射率光谱。对于这些测量,可以使用许多不同的技术,但是它们忽略了折射率的色散,因此不能用于提取绝对折射率谱。提出了一种新颖的技术来系统准确地测量半导体激光器的所有这些参数。与本文将简要介绍的常用技术相比,该新技术具有以下优点:(1)确定过程仅使用测得的自发发射光谱,而无需了解诸如固有光学损耗之类的参数,刻面反射率和波导限制因子,目前很难通过实验进行检查; (2)获得每个给定电流的结果(例如,此技术测量每个给定电流的固有光学损耗,而不是整个电流范围内的平均值); (3)考虑到折射率的色散; (4)既可以精确地测量给定电流的绝对折射率谱,也可以精确测量其随电流的变化。 (5)增益光谱和折射率可以任意测量。 (6)提高了测量精度; (7)不需要可调参数或重新校准。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号