首页> 外文期刊>Environmental Modeling & Assessment >Sensitivity Analysis of Phenol Degradation with Sulfate Reduction Under Anaerobic Conditions
【24h】

Sensitivity Analysis of Phenol Degradation with Sulfate Reduction Under Anaerobic Conditions

机译:厌氧条件下硫酸盐还原法降解苯酚的敏感性分析

获取原文
获取原文并翻译 | 示例
           

摘要

This study derives a mathematical description of the kinetics of phenol degradation with sulfate reduction by an anaerobic mixed-culture biofilm on an inert medium. The model incorporates the mechanisms of diffusive mass transport and Monod kinetics. It is solved using both the orthogonal collocation method and Gear's method. Sensitivity studies were performed to investigate the dependence of process dynamics on the model parameters pertaining to biokinetic parameters, liquid film mass transport, and the biofilm and reactor operational parameters. Sensitivity analysis quantifies the magnitude of the effect of each variable on the simulated results using the least-square method. The transient-state process dynamics are sensitive to the biokinetic parameters including yield coefficient of phenol-utilizing bacteria, Monod maximum specific utilization rate of phenol, and the decay coefficient of phenol-utilizing bacteria. The process efficiency is also sensitive to biofilm parameters such as biofilm density of phenol-utilizing bacteria and initial biofilm thickness , and to such operational parameters as the influent phenol concentration and the hydraulic retention time of the system. The process dynamics are relatively insensitive to mass transport parameters, including the film transfer coefficient of phenol and the diffusion coefficient of phenol. Sensitivity analysis of the process dynamics to model parameters helps determine how to alter process conditions to enhance removal efficiency.
机译:这项研究得出了在惰性介质上厌氧混合培养生物膜对硫酸盐还原引起的苯酚降解动力学的数学描述。该模型结合了扩散质量传输和莫诺动力学的机理。可以使用正交配置法和Gear方法来求解。进行了敏感性研究,以研究过程动力学对与生物动力学参数,液膜质量传输以及生物膜和反应器操作参数有关的模型参数的依赖性。灵敏度分析使用最小二乘法来量化每个变量对模拟结果的影响的大小。瞬态过程动力学对生物动力学参数敏感,包括酚利用细菌的产量系数,Monod苯酚最大比利用率和酚利用细菌的衰减系数。工艺效率还对生物膜参数(例如,利用苯酚的细菌的生物膜密度和初始生物膜厚度)以及操作参数(例如进水酚浓度和系统的水力停留时间)敏感。工艺动力学对传质参数不敏感,传质参数包括苯酚的膜转移系数和苯酚的扩散系数。对模型参数进行过程动力学的敏感性分析有助于确定如何更改过程条件以提高去除效率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号