首页> 外文期刊>Energy >Effect of dewatered sludge microwave pretreatment temperature and duration on net energy generation and biosolids quality from anaerobic digestion
【24h】

Effect of dewatered sludge microwave pretreatment temperature and duration on net energy generation and biosolids quality from anaerobic digestion

机译:脱水污泥微波预处理温度和时间对厌氧消化净能量产生和生物固体质量的影响

获取原文
获取原文并翻译 | 示例
           

摘要

The effects of microwave (MW) final temperature (80 and 160 degrees C) and holding time (1 and 30 minutes) were evaluated by ten anaerobic digesters (AD). MW was applied to dewatered secondary sludge with total solids of 10.5 +/- 0.5% (by weight) to minimize energy input. Mixed sludge was digested under thermophilic and mesophilic conditions at sludge retention times (SRTs) of 20, 12, and 6 days. MW final temperature had significantly higher effect on solubilization than holding time. At MW of 80/160 degrees C, longer holding times further enhanced solubilization but increased volatile fatty acid accumulation at thermophilic SRT of 6 days. While all mesophilic digesters met the Class B requirement in terms of pathogens removal, all thermophilic digesters produced Class A biosolids. MW-ADs were able to tolerate 15-20% higher loading rates compared to controls. Up to 21% higher organics removals were achieved by MW. MW at 160 degrees C generated the highest amount of extra heat that could be used within/outside of plant. However energy recovered from the enhanced methane production was not sufficient to cover the electrical energy consumed by MW. Therefore, a custom-designed electromagnetic heating unit based on dielectric properties of sludge is needed to minimize energy input and maximize energy recovery for full-scale applications. (C) 2018 Elsevier Ltd. All rights reserved.
机译:通过十个厌氧消化器(AD)评估了微波(MW)的最终温度(80和160摄氏度)和保持时间(1和30分钟)的影响。 MW用于总固体含量为10.5 +/- 0.5%(按重量计)的脱水二级污泥,以最大程度地减少能量输入。混合污泥在嗜热和中温条件下进行消化,污泥保留时间(SRT)为20、12和6天。 MW最终温度对溶解的影响比保持时间高得多。在80/160摄氏度的MW下,更长的保持时间进一步增强了增溶作用,但在6天的高温SRT下增加了挥发性脂肪酸的积累。尽管所有中温消化池在病原体去除方面均符合B级要求,但所有嗜热消化池均产生A级生物固体。与对照相比,MW-AD能够耐受15-20%的高负荷率。 MW可将有机物去除率提高多达21%。 160摄氏度下的MW产生了可在工厂内部/外部使用的最多的额外热量。但是,从提高的甲烷产量中回收的能量不足以覆盖兆瓦所消耗的电能。因此,需要基于污泥介电特性的定制设计的电磁加热单元,以最小化能量输入并最大程度地提高能量回收,以进行全面应用。 (C)2018 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号