...
首页> 外文期刊>Pakistan journal of medical sciences. >Standardized approach to result analysis and interpretation of initial experience of coronary computed tomography angiography in a tertiary care hospital
【24h】

Standardized approach to result analysis and interpretation of initial experience of coronary computed tomography angiography in a tertiary care hospital

机译:三级护理医院冠状动脉计算机断层造影术初探结果分析与解释的标准化方法

获取原文
           

摘要

Objective: To have a systematic standardized approach to performing and interpretation of coronary CT Angiography (CTA) in order to maintain and enhance the diagnostic accuracy of the imaging modality. Methods: This retrospective observational study was performed in Radiology Department, Lady Reading Hospital, Medical Teaching Institute, Peshawar, Pakistan from August 2018 to September 2019. Patients referred for coronary CT angiography were screened and prepared in radiology department. The examination was performed on Toshiba-160 slice CT Scanner (Prime Aquilion) utilizing standardized protocols tailored towards optimum image acquisition. Interpretation of the images were based on the guidelines provided by the Society of Cardiovascular Computed Tomography (SCCT). Results: Total 95 CTCA procedures were performed in the department, out of which 85 were included in study showing 49 (57%) as normal and 36 (42%) were positive for coronary disease. Of the abnormal cases 16(18.8%) had mild disease, nine (10.6%) patients had moderate disease, while severe disease was noted in 11 (12.9%) cases. Coronary quantitative stenosis revealed five cases (5.9%) with LAD involvement only and five (5.9%) with severe triple vessel disease. The remaining varied in degree of stenosis and number of segments involved. Post CABG were 14 cases (16%) and native arteries showed triple vessel disease. CTA for percutaneous stent patency were three (3.5%) cases with 100% stent patency. Conclusion: Patient selection with tailored protocols are the mainstay for achieving optimal images. This form the basis for accurate interpretation, based on a standardized and systematic approach, utilizing various post processing tools, in order to maintain the high diagnostic accuracy of this semi-invasive, safe imaging modality in a variety of patients suspected of coronary artery disease, coronary artery bypass grafts and stent patency. doi: https://doi.org/10.12669/pjms.36.4.2174 How to cite this:Nishtar T, Nadeem Ullah, Ahmad T, Ahmed F. Standardized approach to result analysis and interpretation of initial experience of coronary computed tomography angiography in a tertiary care hospital. Pak J Med Sci. 2020;36(4):---------.??doi: https://doi.org/10.12669/pjms.36.4.2174 This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
机译:目的:有一种系统的标准化方法,用于对冠状动脉CT血管造影(CTA)进行和解释,以维持和增强成像模态的诊断准确性。方法:从2018年8月至2019年8月到2019年8月,Pehistan,Pehistan,Peshakistan,Pehakistan,Pehawar,2019年9月,在放射学部门,夫人阅读医院,Pehakistan,筛查并制备并制备在放射学部门,在2018年9月在放射学部门,夫人阅读医院,医学院医学院,医学院医学院。在东芝-160切片CT扫描仪(Prime Anfimilion)上进行了检查,利用针对最佳图像采集量身定制的标准化协议。对图像的解释是基于心血管计算断层扫描(SCCT)提供的指导方针。结果:总共95例CTCA程序在部门进行,其中85例含有85例,显示49(57%),正常,36例(42%)为冠状动脉疾病阳性。在异常情况下16(18.8%)具有轻度疾病,九(10.6%)患者患有中度疾病,而在11例(12.9%)病例中注意到严重疾病。冠状动脉定量狭窄揭示了五种情况(5.9%),LAD参与仅限,5例(5.9%),具有严重的三血管疾病。剩余的狭窄程度和所涉及的段数。发布后CABG为14例(16%)和本地动脉显示三血管疾病。用于经皮支架的CTA是含有100%支架的三(3.5%)患者。结论:具有量身定制协议的患者选择是实现最佳图像的主干。这构成了准确的解释的基础,基于一种标准化和系统的方法,利用各种后加工工具,以维持这种半侵入性,安全的成像模态在涉嫌冠状动脉疾病的各种患者中的高诊断准确性,冠状动脉旁路移植物和支架通畅。 DOI:https://doi.org/10.12669/pjms.36.4.2174如何引用这个:Nishtar T,Nadeem Ullah,Ahmad T,Ahmed F.冠状动脉计算机断层造影血管造影初始经验的标准化方法一家高级护理医院。 Pak J Med Sci。 2020; 36(4):---------。?? DOI:https://doi.org/10.12669/pjms.36.4.2174这是一个开放的访问文章,分布在创造性的公共条件下归属许可证(http://creativecommons.org/licenses/by/3.0),它允许在任何介质中不受限制的使用,分发和再现,只要原始工作被正确引用。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号