In this article, the thermal-treated sericite was modified by both fluorosilicate and the combination of fluorosilicate and nitric acid in order to reduce its layer charge and gain cation exchange capabilities for the preparation of sericite/polymer nanocomposites. After several orthogonal experiments and single factor experiments, the optimal experimental conditions were set up and we found that the combination of nitric acid and fluorosilicate is much more effective than fluorosilicate alone. Chemical composition analysis showed Al3+ was dissolved out from sericite and the dissolving amount is 65?mg/g under optimal experimental conditions. Combining the NMR test, it is considered that the Si/Al ratio in the tetrasheet of the modified product increased from 3.48 to 10. The layer charge reduced and the CEC value increased after fluorosilicate modification, which means the modified sericite is a promising matrix for clay-polymer nanocomposites.
展开▼
