首页> 外文期刊>Revista Latinoamericana de Metalurgia y Materiales >OBTENCIóN Y CARACTERIZACIóN DEL PIGMENTO CERáMICO CuCr?O? POR LOS MéTODOS ALTERNATIVOS DE SíNTESIS: MICELAS NORMALES Y GEL CITRATO ( PREPARATION AND CHARACTERIZATION OF CERAMIC PIGMENT CuCr 2 O 4 BY ALTERNATIVE METHODS OF SYNTHESIS: NORMAL MICELLES AND CITRATE GEL )
【24h】

OBTENCIóN Y CARACTERIZACIóN DEL PIGMENTO CERáMICO CuCr?O? POR LOS MéTODOS ALTERNATIVOS DE SíNTESIS: MICELAS NORMALES Y GEL CITRATO ( PREPARATION AND CHARACTERIZATION OF CERAMIC PIGMENT CuCr 2 O 4 BY ALTERNATIVE METHODS OF SYNTHESIS: NORMAL MICELLES AND CITRATE GEL )

机译:陶瓷颜料CuCr?O?的获得与表征替代合成方法:普通胶束和柠檬酸胶(通过交替合成方法制备和表征陶瓷颜料CuCr 2或4:普通胶束和柠檬酸胶)

获取原文
           

摘要

En el presente trabajo se muestra la síntesis y la caracterización del pigmento cerámico CuCr ?O?, obtenido por los métodos alternativos de síntesis de micelas normales y gel citrato. Los polvos obtenidos fueron caracterizados por las técnicas de Calorimetría Diferencial de Barrido, Análisis termográvimetrico, Difracción de rayos X, Microscopia Electrónica de Barrido, Espectrofotometría Visible y Colorimetría CIE L*a*b*. Los pigmentos cerámicos fueron obtenidos a temperaturas de calcinación y tiempos de residencia de 700 °C y 6 h, respectivamente, estas condiciones de proceso son menores a los reportados empleando el método de estado sólido, el cual actualmente es utilizado en la industria de pigmentos cerámicos. In the present work investigation was carried out the synthesis and characterization of ceramic pigment CuCr?O? obtained by synthesis methods of normal micelles and citrate gel. The powders were characterized by techniques like differential scanning calorimetry, thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, VIS spectrophotometry and colorimetry CIEL*a*b*. Ceramic pigments were obtained at calcination temperature of 700 °C and residence times of 6 h, which are lower than those employed by the solid state method, used in the industry of ceramic pigments.
机译:本工作表明了通过正常胶束和柠檬酸盐凝胶的另一种合成方法获得的陶瓷颜料CuCr 2 O 3的合成和表征。通过差示扫描量热法,热重分析,X射线衍射,扫描电子显微镜,可见光分光光度法和CIE L * a * b *比色法对所得粉末进行表征。分别在700℃和6小时的煅烧温度和停留时间下获得了陶瓷颜料,这些工艺条件低于目前在陶瓷颜料行业中使用固态方法报道的工艺条件。 。在本工作中,进行了陶瓷颜料CuCr2O3的合成和表征。通过正常胶束和柠檬酸盐凝胶的合成方法获得。通过差示扫描量热法,热重分析,X射线衍射,扫描电子显微镜,VIS分光光度法和比色法CIEL * a * b *等技术对粉末进行表征。在700℃的煅烧温度和6小时的停留时间下获得了陶瓷颜料,其比在陶瓷颜料工业中使用的固态方法所采用的那些低。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号