首页> 外文期刊>Revista de metalurgia >Evolución microestructural y envejecimiento dinámico por deformación en la aleación Mg-6%Gd- 1%Zn durante ensayos a tracción y compresión a temperaturas intermedias
【24h】

Evolución microestructural y envejecimiento dinámico por deformación en la aleación Mg-6%Gd- 1%Zn durante ensayos a tracción y compresión a temperaturas intermedias

机译:Mg-6%Gd-1%Zn合金在中间温度下的拉伸和压缩测试过程中的微观组织演变和动态时效变形

获取原文
           

摘要

The Mg-6%Gd-1%Zn alloy exhibits flow serrations when strained at intermediate temperatures due to the dynamic strain ageing phenomenon. Such flow serrations during deformation need the simultaneous and competitive movement of diffusing solutes and mobile dislocations. Although the alloy examined has a random texture, tension-compression asymmetry and significantly greater yield stress and work hardening in compression than in tension have been observed. During deformation at intermediate temperatures, and independently of the nature of the stress (tension or compression), the activation of -dislocations and tensile twin systems has been observed. The volume fraction of twins is always higher, however, in the case of compression testing. At the intermediate temperatures where flow serrations are observed, Gd and Zn atoms pin dislocations as well as twins. Above 250 °C, the flow serrations disappear and ?]′ and ?]′′ precipitates form in the basal plane which increase work hardening.
机译:由于动态应变时效现象,在中等温度下应变时,Mg-6%Gd-1%Zn合金表现出流锯齿。这种变形期间的流锯齿需要扩散的溶质和可移动位错同时竞争地运动。尽管所检验的合金具有无规织构,但已观察到拉伸-压缩不对称性以及在压缩中比在拉伸中明显更大的屈服应力和加工硬化。在中间温度下的变形过程中,与应力(拉伸或压缩)的性质无关,已观察到位错和双晶拉伸系统的激活。但是,在压缩测试的情况下,孪晶的体积分数始终较高。在观察到流动有锯齿的中间温度下,Gd和Zn原子会发生位错以及孪晶。高于250°C时,流动锯齿消失,并且在基面上形成?]'和?]''沉淀,从而增加了加工硬化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号