首页> 外文期刊>Medycyna Pracy >Occurrence of Legionella in technological water and studies of the total number of bacteria and fungi in indoor air at workplaces where water aerosol is generated
【24h】

Occurrence of Legionella in technological water and studies of the total number of bacteria and fungi in indoor air at workplaces where water aerosol is generated

机译:军团菌在工业用水中的产生以及在产生水气溶胶的工作场所中室内空气中细菌和真菌总数的研究

获取原文
           

摘要

Background: The aim of the study was to confirm the fact that technological water is a significant carrier of Legionella, a potential serious threat to the health of operators of mechanical devices generating contaminated water aerosol. Material and Methods: Microbiological analyses of water and indoor air were conducted in 8 different production facilities involved in mechanical processing of glass. The study covered 81 samples of water collected from technical water systems. Isolation of Legionella and the determination of total number of microorganisms were processed according to PN-EN ISO 11731-2:2008E and PN-EN ISO 6222:2004P, respectively. Air samples were collected using air samplers and total numbers of bacteria and fungi were determined. Results: The studies of process water, indicated the presence of Legionella in 27.2% of collected samples. These bacteria were present in both closed and open process water reservoirs at 10 cfu/100 ml to 2.9×104 cfu/100 ml. The count of other associated bacteria exceeded 103 cfu/ml. All strains isolated from Legionella-positive samples were identified as L. pneumophila SG 2-14. In 5 of 8 studied production facilities an increased total number of aerial bacteria and fungi was observed in samples collected in close vicinity of aerosol source. Conclusions: To reduce the number of microorganisms in water it is required to introduce technological water quality monitoring and procedures for the cleaning and disinfecting of mechanical devices generating water aerosol. Med Pr 2014;65(3):325–334
机译:背景:该研究的目的是确认以下事实:技术用水是军团菌的重要载体,这对产生受污染的水气溶胶的机械设备的操作者的健康构成潜在的严重威胁。材料和方法:在涉及玻璃机械加工的8个不同生产设施中进行了水和室内空气的微生物学分析。该研究涵盖了从技术水系统收集的81个水样。军团菌的分离和微生物总数的测定分别根据PN-EN ISO 11731-2:2008E和PN-EN ISO 6222:2004P进行。使用空气采样器收集空气样本,并确定细菌和真菌的总数。结果:对过程水的研究表明,在27.2%的采集样品中存在军团菌。这些细菌以10 cfu / 100 ml至2.9×104 cfu / 100 ml的浓度存在于封闭式和开放式工艺水库中。其他相关细菌的计数超过103 cfu / ml。从军团菌阳性样本中分离的所有菌株均被鉴定为嗜肺乳杆菌SG 2-14。在研究的8个生产设备中,有5个在气溶胶源附近收集的样品中观察到了更多的气生细菌和真菌。结论:为减少水中的微生物数量,需要引入技术水质监测和清洁和消毒产生水气溶胶的机械设备的程序。 Med Pr 2014; 65(3):325–334

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号