首页> 外文期刊>Food and Environment Safety >PERFORMANCE OF COMPLETE-MIX AND PLUG-FLOW SYSTEMS DURING TREATMENT OF LOW LOADED NITROGEN DEFICIENT WASTE WATER – SIMULATION WITH ASAL1 MODEL
【24h】

PERFORMANCE OF COMPLETE-MIX AND PLUG-FLOW SYSTEMS DURING TREATMENT OF LOW LOADED NITROGEN DEFICIENT WASTE WATER – SIMULATION WITH ASAL1 MODEL

机译:低负荷缺氮废水处理过程中完全混合和塞流系统的性能– ASAL1模型模拟

获取原文
           

摘要

Based on Modified Ludzack-Ettinger process, the performance of biological complete-mix and plug-flow units are compared during simulative treatment of low loaded nitrogen deficient wastewater. BOD-based model ASAL1 is applied. Different variants of nitrogen deficiency, Anoxic-Aerobic volume distributions, as well as diverse SSVI 3.5 are manipulated. It is shown that plug-flow reactors give better effluent quality over complete-mix systems in relation to indicators: total nitrogen, total BOD and total suspended solids. Nitrogen removal is primarily diminished with the increase of Anoxic against Aerobic zone, while SSVI 3.5 up to 200 ml/g has a less pronounced effect on this parameter. However,the optimal nutrient composition gives the lowest nitrogen in the outcome stream – 95.53 % for plug-flow and 94.75 % for complete-mix series.
机译:基于改良的Ludzack-Ettinger工艺,在模拟处理低负荷缺氮废水的过程中,对生物完全混合和推流装置的性能进行了比较。应用基于BOD的模型ASAL1。对氮缺乏,缺氧-需氧量分布以及不同的SSVI 3.5的不同变体进行了处理。结果表明,相对于以下指标,与全混合系统相比,活塞流反应器的出水水质更好:总氮,总生化需氧量和总悬浮固体。随着厌氧区对好氧区的增加,氮的去除主要减少,而SSVI 3.5高达200 ml / g对该参数的影响较小。但是,最佳的养分组成可以使产出流中的氮含量最低–活塞流为95.53%,完全混合系列为94.75%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号