首页> 外文期刊>International Journal of Forestry Research >Effect of Spacing Regimes on Growth, Yield, and Wood Properties ofTectona grandisat Longuza Forest Plantation, Tanzania
【24h】

Effect of Spacing Regimes on Growth, Yield, and Wood Properties ofTectona grandisat Longuza Forest Plantation, Tanzania

机译:间隔方式对坦桑尼亚龙扎森林人工林Tectona grandisat生长,产量和木材特性的影响

获取原文
           

摘要

This study examined the effects of planting spacing on growth, yield, and wood properties of teak planted at square spacing regimes of 2 m, 3 m, and 4 m at Longuza Forest Plantation, Tanzania. To achieve this, tree, stand, and wood properties were studied at age of 14 years. Results showed that diameter at breast height and total height increased with increasing spacing. Mean annual increment increased significantly with increasing spacing while spacing did not have significant effect on total volume production and basal area. Basic density is also not affected by spacing while heartwood proportion increases as planting spacing increases. All studied wood properties (modulus of rupture, modulus of elasticity, compression strength tangential to grain, and shear tangential to the grain) except cleavage tangential to grain were not significantly affected by increasing spacing. It is recommended to use the spacing of 3 × 3 m, but if thinning can be done before onset of competition at 5 years, the currently used spacing of 2.5 × 2.5 m can still be used. However, the use of a spacing of 4 × 4 m can give at least 50% heartwood at shorter rotation age of 30 years.
机译:这项研究考察了坦桑尼亚隆格扎(Luzuza)人工林以2µm,3µm和4µm的方形间距种植间距对柚木生长,产量和木材特性的影响。为此,我们在14岁时研究了树木,林分和木材的特性。结果表明,乳房高度和总高度的直径随着间距的增加而增加。平均年增量随着间距的增加而显着增加,而间距对总产量和基础面积没有显着影响。基本密度也不受间隔的影响,而心材比例随种植间隔的增加而增加。所有研究的木材特性(断裂模量,弹性模量,与谷物相切的抗压强度和与谷物相切的抗剪强度),除了与谷物相切的劈裂均不受间距增加的显着影响。建议使用3×3μm的间距,但如果可以在比赛开始5年之前进行减薄,则仍可以使用当前使用的2.5×2.5μm的间距。但是,在30年的较短旋转年龄下,使用4×4μm的间距可以使心材至少获得50%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号