...
首页> 外文期刊>International Journal of Electrochemical Science >Synergism of Saccharum Officinarum, Nicotiana Tobaccum and Ananas Comusus Extract Additives on the morphological structure and Quality of Electroplated Zinc on Mild Steel
【24h】

Synergism of Saccharum Officinarum, Nicotiana Tobaccum and Ananas Comusus Extract Additives on the morphological structure and Quality of Electroplated Zinc on Mild Steel

机译:糖,烟草和菠萝提取物添加剂对低碳钢电镀锌的形态结构和质量的协同作用

获取原文
           

摘要

Synergism of the combined Saccharum Officinarum (sugar cane), Nicotiana Tobaccum (tobacco) andAnanas Comusus (pine apple) extract additives on the surface morphology and quality of electroplatedo zinc on mild steel in acid chloride solution was investigated at ambient temperature (~28 C). Theexperiments were performed at different plating time (15 and 18 min), additive concentrations (2, 2.5,o 3 ml/50ml of acid chloride solution), pH5, temperature (27-30 C), current (0.08A) and voltage (13 VDC) conditions. Zinc electroplating on mild steel was performed using a DC supply. Examination ofthe steel plated surface was performed with scanning electron microscopy (SEM) and EnergyDispersive Spectroscopy (EDS) for surface elemental composition analysis. Different surfacecharacteristics were obtained depending upon the concentration of the additive and the plating time.The corrosion resistance of the plated surface was determined by weight loss method. Surfacemorphology of the plated surface indicated a good electroplating that was better than either of theextracts alone. The electroplating process was sensitive to changes in additive concentration andplating time as any variation in the plating parameter produced a new and different surface crystalmorphology.
机译:在环境温度(〜28 C)下研究了蔗糖,烟草,烟草和菠萝提取物组合对低碳钢上电镀锌表面形态和质量的协同作用。 。实验在不同的电镀时间(15和18分钟),添加剂浓度(2,2.5,3 ml / 50ml酰氯溶液),pH5,温度(27-30 C),电流(0.08A)和电压( 13 VDC)条件。使用直流电源在低碳钢上进行锌电镀。用扫描电子显微镜(SEM)和能量分散谱(EDS)对镀覆的表面进行检查,以进行表面元素组成分析。根据添加剂的浓度和电镀时间获得不同的表面特性。通过重量损失法确定电镀表面的耐腐蚀性。镀层表面的表面形态表明电镀效果好于单独的两种提取物。电镀工艺对添加剂浓度和电镀时间的变化很敏感,因为电镀参数的任何变化都会产生新的和不同的表面晶体形态。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号