...
首页> 外文期刊>Coatings >PL Study on the Effect of Cu on the Front Side Luminescence of CdTe/CdS Solar Cells
【24h】

PL Study on the Effect of Cu on the Front Side Luminescence of CdTe/CdS Solar Cells

机译:铜对CdTe / CdS太阳能电池正面发光影响的PL研究

获取原文
           

摘要

The effect of Cu on highly efficient CdTe thin solid film cells with a glass/TCO/CdS/CdTe structure subjected to CdCl2 treatment was investigated by low-temperature photoluminescence (PL). The PL of the CdS/CdTe junction in samples without Cu deposition revealed a large shift in the bound exciton position due to the formation of CdSxTe1?x alloys with Eg (alloy) ? 1.557 eV at the interface region. After Cu deposition on the CdTe layer and subsequent heat treatment, a neutral acceptor-bound exciton (A0Cu,X) line at 1.59 eV and two additional band-edge peaks at 1.54 and 1.56 eV were observed, indicating an increase in the energy gap value in the vicinity of the CdTe/CdS interface to that characteristic of bulk CdTe. These results may suggest the disappearance of the intermixing phase at the CdTe/CdS interface due to the presence of Cu atoms in the junction area and the interaction of the Cu with sulfur atoms. Furthermore, an increase in the intensity of CdS-related peaks in Cu-doped samples was observed, implying that Cu atoms were incorporated into CdS after heat treatment.
机译:通过低温光致发光(PL)研究了Cu对经过CdCl2处理的具有玻璃/ TCO / CdS / CdTe结构的高效CdTe薄膜固体薄膜电池的影响。样品中没有Cu沉积的CdS / CdTe结的PL显示,由于形成了带有Eg(合金)α的CdSxTe1αx合金,结合激子位置发生了很大的变化。界面区域为1.557 eV。铜沉积在CdTe层上并随后进行热处理后,观察到中性受体结合的激子(A0Cu,X)线处于1.59 eV处,并且在1.54和1.56 eV处出现了两个附加的带边峰,表明能隙值增加了在CdTe / CdS界面附近具有大块CdTe的特征。这些结果可能表明,由于连接区域中存在铜原子以及铜与硫原子的相互作用,CdTe / CdS界面处的混合相消失了。此外,观察到在掺杂Cu的样品中CdS相关峰的强度增加,这意味着在热处理之后Cu原子被掺入到CdS中。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号