首页> 外文期刊>BMC Musculoskeletal Disorders >Development of biodegradable polycaprolactone film as an internal fixation material to enhance tendon repair: an in vitro study
【24h】

Development of biodegradable polycaprolactone film as an internal fixation material to enhance tendon repair: an in vitro study

机译:可生物降解的聚己内酯薄膜作为内固定材料增强肌腱修复的研究:一项体外研究

获取原文
           

摘要

Background Current tendon repair techniques do not provide sufficient tensile strength at the repair site, and thus early active motion rehabilitation after tendon repair is discouraged. To enhance the post-operative tensile strength, we proposed and tested an internal fixation technique using a polycaprolactone (PCL) biofilm. PCL was chosen for its good biocompatibility, excellent mechanical strength, and an appropriate degradation time scale. Methods PCL biofilms were prepared by a modified melt-molding/leaching technique, and the physical and mechanical properties and in vitro degradation rate were assessed. The pore size distribution of the biofilm and the paratenon of native tendons were observed using scanning electron microscopy. Next, we determined whether this biofilm could enhance the tensile strength of repaired tendons. We performed tensile tests on rabbit Achilles tendons that were first lacerated and then repaired: 1) using modified Kessler suture combined with running peripheral suture (‘control’ group), or 2) using biofilm to wrap the tendon and then fixation with sutures (‘biofilm’ group). The influence of different repair techniques on tendon tensile strength was evaluated by mechanical testing. Results The novel biofilm had supple texture and a smooth surface. The mean thickness of the biofilm was 0.25?mm. The mean porosity of the biofilm was 45.3%. The paratenon of the rabbit Achilles tendon had pores with diameters ranging from 1 to 9?μm, which were similar to the 4–12?μm diameter pores in the biofilm cross-section. The weight loss of the biofilms at 4?weeks was only 0.07%. The molecular weight of PCL biofilms did not change after immersion in phosphate buffered saline for 4?weeks. The failure loads of the biofilm were similar before (48?±?9?N) and after immersion (47?±?7?N, P?>?0.1). The biofilm group had ~70% higher mean failure loads and 93% higher stiffness compared with the control group. Conclusions We proposed and tested an internal fixation technique using a PCL biofilm to enhance tendon repair. Internal fixation with the biofilm followed by standard suturing can significantly increase the tensile strength of tendon repair sites. This technique has the potential to allow active motion rehabilitation during the early post-operative period.
机译:背景技术当前的肌腱修复技术不能在修复部位提供足够的拉伸强度,因此不鼓励在肌腱修复之后进行早期主动运动康复。为了提高术后抗张强度,我们提出并测试了使用聚己内酯(PCL)生物膜的内固定技术。选择PCL是因为它具有良好的生物相容性,出色的机械强度和适当的降解时间范围。方法采用改良的熔融成型/浸出技术制备PCL生物膜,并评估其物理机械性能和体外降解率。使用扫描电子显微镜观察生物膜和天然腱的对位腱的孔径分布。接下来,我们确定该生物膜是否可以增强修复后的肌腱的拉伸强度。我们对兔子的跟腱进行了拉伸测试,首先将其撕裂,然后进行修复:1)使用改良的Kessler缝线结合外围缝合线(“对照组”),或2)使用生物膜包裹肌腱然后用缝线固定(“生物膜小组)。通过机械测试评估了不同修复技术对肌腱拉伸强度的影响。结果新型生物膜质地柔软,表面光滑。生物膜的平均厚度为0.25?mm。生物膜的平均孔隙率为45.3%。兔跟腱的旁腱有直径在1到9?μm范围内的孔,这与生物膜横截面上的4-12?μm直径的孔相似。在4周时生物膜的重量损失仅为0.07%。浸入磷酸盐缓冲液中4周后,PCL生物膜的分子量没有变化。生物膜的破坏载荷在浸入前(48?±?9?N)和浸入后(47?±?7?N,P?>?0.1)相似。与对照组相比,生物膜组的平均破坏载荷高约70%,刚度高93%。结论我们提出并测试了一种使用PCL生物膜增强肌腱修复的内固定技术。用生物膜进行内部固定,然后进行标准缝合,可以显着增加肌腱修复部位的抗张强度。该技术具有在术后早期进行主动运动康复的潜力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号