首页> 外文期刊>Computer Methods in Applied Mechanics and Engineering >Superconvergent patch recovery and a posteriori error estimation technique in adaptive isogeometric analysis
【24h】

Superconvergent patch recovery and a posteriori error estimation technique in adaptive isogeometric analysis

机译:自适应等几何分析中的超收敛斑片恢复和后验误差估计技术

获取原文
           

摘要

In this article, we address adaptive methods for isogeometric analysis based on local refinement guided by recovery based a posteriori error estimates. Isogeometric analysis was introduced a decade ago and an impressive progress has been made related to many aspects of numerical methods and advanced applications. However, related to adaptive mesh refinement guided by a posteriori error estimators, rather few attempts are pursued besides the use of classical residual based error estimators. In this article, we explore a feature common for Isogeometric analysis (IGA), namely the use of structured tensorial meshes that facilitates superconvergence behavior of the gradient in the Galerkin discretization. By utilizing the concept of structured mesh refinement using LR B-splines, our aim is to facilitate superconvergence behavior for locally refined meshes as well. Superconvergence behavior matches well with the use of recovery based a posteriori estimator in the Superconvergent Patch Recovery (SPR) procedure. However, to our knowledge so far, the SPR procedure has not been exploited in the IGA community. We start out by addressing the existence of derivative superconvergent points in the computed finite element solution based on B-splines and LR B-splines for an elliptic model problem (1D and 2D Poisson). Then, we present some recovery procedures for improving the derivatives (or gradient) of the isogeometric finite element solution where the SPR procedure will be the main focus. In particular, we show that our SPR procedure for the improvement of derivatives fulfills the desired consistency criteria. At the end, we develop a posteriori error estimator where the improved gradient obtained from the proposed recovery procedures is used. Numerical results are presented to illustrate the efficiency of using SPR procedure for the improvement of derivatives (or gradient) of computed solution in isogeometric analysis. Then the proposed a posteriori error estimator based adaptive refinement methodology is tested to solve smooth and non-smooth elliptic benchmark problems. The focus is put on whether optimal convergence rates are obtained in the computed solution or not, as well as the effectivity index of the proposed error estimators. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
机译:在本文中,我们介绍了基于局部细化的等几何分析自适应方法,该局部细化由基于后验误差估计的恢复指导。等几何分析是十年前引入的,在数值方法和高级应用的许多方面都取得了令人瞩目的进展。然而,关于由后验误差估计器指导的自适应网格细化,除了使用经典的基于残差的误差估计器以外,几乎没有进行任何尝试。在本文中,我们探索了等几何分析(IGA)的共同特征,即结构化张量网格的使用,该网格在Galerkin离散化中促进了梯度的超收敛行为。通过利用使用LR B样条的结构化网格细化的概念,我们的目标也是促进局部细化网格的超收敛行为。超收敛行为与在超收敛补丁恢复(SPR)过程中基于后验估计的恢复的使用非常匹配。但是,据我们所知,SGA程序尚未在IGA社区中使用。我们从解决椭圆模型问题(一维和二维泊松)的基于B样条和LR B样条的计算有限元解中存在导数超收敛点开始。然后,我们提出一些恢复程序,以改善等几何有限元解决方案的导数(或梯度),其中SPR程序将成为主要重点。尤其是,我们表明,用于改进导数的SPR程序符合所需的一致性标准。最后,我们开发了一种后验误差估计器,其中使用了从建议的恢复程序获得的改进梯度。数值结果表明了在等几何分析中使用SPR程序改善计算解的导数(或梯度)的效率。然后,对提出的基于后验误差估计器的自适应细化方法进行了测试,以解决光滑和不光滑的椭圆基准问题。重点放在是否在计算的解中获得最佳收敛速度,以及所提出的误差估计器的有效性指标。由Elsevier B.V.发布。这是CC BY-NC-ND许可(http://creativecommons.org/licenses/by-nc-nd/4.0/)下的开放获取文章。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号