首页> 外文期刊>Composites Science and Technology >Cryogenic delamination growth in woven glass/epoxy composite laminates under mixed-mode I/II fatigue loading
【24h】

Cryogenic delamination growth in woven glass/epoxy composite laminates under mixed-mode I/II fatigue loading

机译:混合模式I / II疲劳载荷下机织玻璃/环氧树脂复合材料层压板的低温分层生长

获取原文
获取原文并翻译 | 示例
           

摘要

This paper investigates the fatigue delamination growth behavior in woven glass fiber reinforced polymer (GFRP) composite laminates under mixed-mode I/II conditions at cryogenic temperatures. Fatigue delamination tests were performed with the mixed-mode bending (MMB) test apparatus at room temperature, liquid nitrogen temperature (77 K) and liquid helium temperature (4 K), in order to obtain the delamination growth rate as a function of the range of the energy release rate, and the dependence of the delamination growth behavior on the temperature and the mixed-mode ratio of mode I and mode II was examined. The energy release rate was evaluated using three-dimensional finite element analysis. The fractographic examinations by scanning electron microscopy (SEM) were also carried out to assess the mixed-mode fatigue delamination growth mechanisms in the woven GFRP laminates at cryogenic temperatures.
机译:本文研究了在混合模式I / II条件下在低温下机织玻璃纤维增​​强聚合物(GFRP)复合层压板的疲劳分层生长行为。使用混合模式弯曲(MMB)测试设备在室温,液氮温度(77 K)和液氦温度(4 K)下进行疲劳脱层测试,以获得脱层生长速率作为该范围的函数考察了能量释放速率的变化,分层生长行为对温度的影响以及模式I和模式II的混合模式比率。使用三维有限元分析评估能量释放率。还通过扫描电子显微镜(SEM)进行了分形检查,以评估在低温下机织GFRP层压板中混合模式疲劳分层的生长机理。

著录项

  • 来源
    《Composites Science and Technology》 |2011年第5期|p.647-652|共6页
  • 作者单位

    Department of Materials Processing, Graduate School of Engineering, Tohoku University, Aoba-yama 6-6-02, Sendai 980-8579, Japan;

    Department of Materials Processing, Graduate School of Engineering, Tohoku University, Aoba-yama 6-6-02, Sendai 980-8579, Japan;

    Department of Materials Processing, Graduate School of Engineering, Tohoku University, Aoba-yama 6-6-02, Sendai 980-8579, Japan;

    Department of Materials Processing, Graduate School of Engineering, Tohoku University, Aoba-yama 6-6-02, Sendai 980-8579, Japan;

    Department of Materials Processing, Graduate School of Engineering, Tohoku University, Aoba-yama 6-6-02, Sendai 980-8579, Japan;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    A. Polymer-matrix composites (PMCs); B. Delamination; B. Fatigue; C. Finite element analysis (FEA); D. Fractography;

    机译:A.聚合物基复合材料(PMC);B.分层;B.疲劳;C.有限元分析(FEA);D.分形;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号