...
首页> 外文期刊>Components, Packaging and Manufacturing Technology, IEEE Transactions on >Analytical Formulas for Tradeoff Among Channel Loss, Length, and Frequency of src='/images/tex/21718.gif' alt='RC'> - and src='/images/tex/28742.gif' alt='LC'> -Dominant Single-Ended Interconnects for Fast Equalized Link Tradeoff Estimation
【24h】

Analytical Formulas for Tradeoff Among Channel Loss, Length, and Frequency of src='/images/tex/21718.gif' alt='RC'> - and src='/images/tex/28742.gif' alt='LC'> -Dominant Single-Ended Interconnects for Fast Equalized Link Tradeoff Estimation

机译: src =“ / images / tex / 21718.gif” alt =“ RC”> -和 src =“ / images / tex / 28742.gif” alt =“ LC”> -主要单端互连,用于快速均衡链路权衡估计

获取原文
获取原文并翻译 | 示例
           

摘要

This paper presents simple and intuitive closed-form formulas for tradeoff among channel loss, length, and frequency of single-ended interconnects to aid fast equalized link tradeoff estimation. Based on a transfer function model for single-ended interconnects, we derived two closed-form tradeoff formulas for - and -dominant interconnects. The formulas’ accuracies and computation time improvements are verified by comparison with the SPICE simulation and the measurement results. According to our formulas, the loss is roughly a linear function of the product of the length and the square root of the frequency in -dominant interconnects. In -dominant interconnects, the channel loss due to skin effect is roughly proportional to the product of the length and the square root of the frequency, while the channel loss due to dielectric loss is approximately proportional to the product of the length and the frequency. From the channel loss of our formulas, an equalized eye size can be easily estimated. Therefore, designers can use our tradeoff formulas easily and quickly to estimate link-level tradeoff among the equalized eye size, the data rate, and the channel length in designing an equalized link through - and -dominant single-ended interconnects.
机译:本文为通道损耗,长度和单端互连的频率之间的折衷提供了简单直观的闭式公式,以帮助快速均衡链路折衷估计。基于单端互连的传递函数模型,我们导出了-和-主导互连的两个闭式折衷公式。通过与SPICE仿真和测量结果进行比较,可以验证公式的准确性和计算时间的改进。根据我们的公式,损耗大约是主导互连中长度和频率平方根乘积的线性函数。在主要互连中,归因于集肤效应的信道损耗与长度和频率平方根的乘积大致成比例,而因介电损耗而引起的信道损耗与长度和频率的乘积大致成比例。根据我们公式的通道损耗,可以轻松估算出均等的眼睛大小。因此,在通过-和-优势单端互连设计均衡链路时,设计人员可以轻松快捷地使用我们的权衡公式来估算均衡的眼图大小,数据速率和通道长度之间的链路级权衡。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号