首页> 外文期刊>Combustion Science and Technology >Solar-Driven Torrefaction of a Lignin-Rich Biomass Residue in a Directly Irradiated Fluidized Bed Reactor
【24h】

Solar-Driven Torrefaction of a Lignin-Rich Biomass Residue in a Directly Irradiated Fluidized Bed Reactor

机译:木质素含量高的生物质残渣在直接辐射流化床反应器中的太阳能驱动的焙烧

获取原文
获取原文并翻译 | 示例
           

摘要

The share of energy production from renewable sources is continuously increasing and aims at reaching two-thirds of primary energy supply in 2050. In this scenario, the 2009/28/EC Directive requires that at least 10% of the transportation fuel of every EU Country derives from renewable sources by 2020, thus largely encouraging the production of biofuels. The synthesis of second-generation biofuels is characterized by extensive generation of residues with large lignin content. Torrefaction can be applied to sterilize and stabilize this residue, and to upgrade its properties for subsequent utilization in the energy field. In this study, the use of solar energy via concentrating solar power systems is proposed to perform solar-assisted torrefaction of a lignin-rich residue derived from a second-generation bioethanol production plant. The process was carried out in a lab-scale directly irradiated bubbling fluidized bed (BFB) reactor, a system designed so as to simultaneously operate as a solar receiver and a reactor in real applications. Experiments were also performed in a lab-scale conventional (i.e. electrically heated) BFB test reactor. Chemical and physical analyses were performed on the product materials to investigate changes in the elemental composition and volatile matter content as a function of the reaction temperature. Heating values of the torrefied materials were also characterized. Scanning electron microscopy (SEM) analyses were performed on the torrefied residues to highlight possible differences in the structure of the materials recovered after solar and nonsolar experiments. The influence of operating conditions on the quality of the torrefied biomass has been assessed, with a particular emphasis on the possible overheating of fuel particles under the high radiative flux conditions experienced in solar-driven torrefaction.
机译:可再生能源生产的能源份额不断增加,目标是到2050年达到一次能源供应的三分之二。在这种情况下,2009/28 / EC指令要求每个欧盟国家的运输燃料至少占10%到2020年,这些能源将来自可再生能源,因此在很大程度上鼓励了生物燃料的生产。第二代生物燃料的合成具有大量木质素含量高的残留物的特征。烘焙可用于对该残留物进行灭菌和稳定化,并提高其性能,以供随后在能源领域中使用。在这项研究中,提出了通过集中太阳能系统利用太阳能来对第二代生物乙醇生产厂产生的富含木质素的残留物进行太阳能辅助焙干的方法。该过程在实验室规模的直接辐射式鼓泡流化床(BFB)反应器中进行,该系统设计为在实际应用中同时充当太阳能接收器和反应器。实验也在实验室规模的常规(即电加热)BFB测试反应器中进行。对产品材料进行了化学和物理分析,以研究元素组成和挥发性物质含量随反应温度变化的变化。还表征了焙烧材料的热值。对经过焙烧的残留物进行了扫描电子显微镜(SEM)分析,以突出太阳能和非太阳能实验后回收的材料结构的可能差异。已经评估了操作条件对焙烧生物质质量的影响,特别强调了在太阳能驱动的焙烧中经历的高辐射通量条件下燃料颗粒可能过热。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号