首页> 外文期刊>Combustion and Flame >An experimental and kinetic modeling study of n-propanol and i-propanol ignition at high temperatures
【24h】

An experimental and kinetic modeling study of n-propanol and i-propanol ignition at high temperatures

机译:高温下正丙醇和异丙醇着火的实验和动力学模型研究

获取原文
获取原文并翻译 | 示例
           

摘要

Ignition delay times of n- and i-propanol mixtures in argon-diluted oxygen were measured behind reflected shocks. Experimental conditions are: temperatures from 1100 and 1500K, pressures from 1.2 to 16.0 atm, fuel concentrations of 0.5%, 0.75%, 1.0%, and equivalence ratios of 0.5, 1.0 and 2.0. A detailed kinetic model consisting of 238 species and 1448 reactions was developed to simulate the ignition of the two propanol isomers, with the computed ignition delay times agreeing well with the present measured results as well as the literature data at other conditions. Further validation of the kinetic mechanism was conducted by comparing the simulated results with measured JSR data and laminar flame speeds, and reasonable agreements were achieved for all test conditions. Moreover, reaction pathway analysis indicated that n-propanol mainly produces ethenol, ethene and propene, while i-propanol primarily produces acetone and propene. Finally, sensitivity analysis demonstrated that some fuel-species reactions can be found in the most important reactions for both propanols, and these are mainly the H-abstraction reactions.
机译:在反射冲击后,测量了氩气稀释后的正丙醇和异丙醇混合物的点火延迟时间。实验条件是:温度为1100和1500K,压力为1.2至16.0 atm,燃料浓度为0.5%,0.75%,1.0%,当量比为0.5、1.0和2.0。建立了一个由238个物种和1448个反应组成的详细动力学模型,以模拟两种丙醇异构体的着火,所计算出的着火延迟时间与当前的测量结果以及在其他条件下的文献数据相吻合。通过将模拟结果与测得的JSR数据和层流火焰速度进行比较,对动力学机理进行了进一步验证,并且在所有测试条件下均取得了合理的协议。此外,反应路径分析表明,正丙醇主要产生乙醇,乙烯和丙烯,而异丙醇主要产生丙酮和丙烯。最后,敏感性分析表明,对于两种丙醇,在最重要的反应中都可以发现某些燃料种类的反应,而这些反应主要是H吸收反应。

著录项

  • 来源
    《Combustion and Flame》 |2014年第3期|644-656|共13页
  • 作者单位

    State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, People's Republic of China;

    State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, People's Republic of China;

    State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, People's Republic of China;

    State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, People's Republic of China;

    State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, People's Republic of China;

    State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, People's Republic of China;

    Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08540-5263, United States;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Propanol isomers; Ignition delay; Shock tube; Measurement; Chemical kinetics;

    机译:丙醇异构体;点火延迟;避震管;测量;化学动力学;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号