...
首页> 外文期刊>Bioprocess and Biosystems Engineering >Viscosity dynamics and the production of extracellular polymeric substances and soluble microbial products during anaerobic digestion of pulp and paper mill wastewater sludges
【24h】

Viscosity dynamics and the production of extracellular polymeric substances and soluble microbial products during anaerobic digestion of pulp and paper mill wastewater sludges

机译:纸浆和造纸厂废水污泥厌氧消化过程中的粘度动力学以及胞外聚合物和可溶性微生物产物的产生

获取原文
获取原文并翻译 | 示例
           

摘要

The production processes of the pulp and paper industry often run in campaigns, leading to large variations in the composition of wastewaters and waste sludges. During anaerobic digestion (AD) of these wastes, the viscosity or the production of extracellular polymeric substances (EPS) and soluble microbial products (SMP) may be affected, with the risk of foam formation, inefficient digester mixing or poor sludge dewaterability. The aim of this study was to investigate how viscosity and production of EPS and SMP during long-term AD of pulp and paper mill sludge is affected by changes in organic loading rate (OLR) and hydraulic retention time (HRT). Two mesophilic lab-scale continuous stirred tank reactors (CSTRs) were operated for 800 days (R1 and R2), initially digesting only fibre sludge, then co-digesting fibre sludge and activated sludge. The HRT was lowered, followed by an increase in the OLR. Reactor fluids were sampled once a month for rheological characterization and analysis of EPS and SMP. The production of the protein fraction of SMP was positively correlated to the OLR, implicating reduced effluent qualities at high OLR. EPS formation correlated with the magnesium content, and during sulphate deficiency, the production of EPS and SMP increased. At high levels of EPS and SMP, there was an increase in viscosity of the anaerobic sludges, and dewatering efficiency was reduced. In addition, increased viscosity and/or the production of EPS and SMP were important factors in sludge bulking and foam formation in the CSTRs. Sludge bulking was avoided by more frequent stirring.
机译:纸浆和造纸工业的生产过程通常在竞选活动中进行,导致废水和废物污泥的成分发生很大变化。在这些废物的厌氧消化(AD)期间,可能会影响粘度或胞外聚合物(EPS)和可溶性微生物产物(SMP)的产生,并有泡沫形成,消化池混合效率低或污泥脱水性差的风险。这项研究的目的是研究纸浆和造纸厂污泥长期AD期间的粘度以及EPS和SMP的产生如何受到有机负荷率(OLR)和水力停留时间(HRT)的变化的影响。两个中温实验室规模的连续搅拌釜反应器(CSTR)运行了800天(R1和R2),最初仅消化纤维污泥,然后共同消化纤维污泥和活性污泥。降低HRT,然后增加OLR。每月对反应器流体进行一次采样,以进行流变学表征和EPS和SMP分析。 SMP蛋白质级分的产生与OLR正相关,暗示在高OLR时废水质量降低。 EPS的形成与镁含量相关,在硫酸盐缺乏时,EPS和SMP的产量增加。在较高的EPS和SMP水平下,厌氧污泥的粘度增加,脱水效率降低。另外,粘度的增加和/或EPS和SMP的产生是CSTR中污泥膨胀和泡沫形成的重要因素。通过更频繁地搅拌可以避免污泥膨胀。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号