首页> 外文期刊>Asian journal of water, environment and pollution >Acute Toxicity Study of Heavy Metal Chromium and Tannery Effluent Water in Water Flea, Daphnia magna Straus by Bioassay Method
【24h】

Acute Toxicity Study of Heavy Metal Chromium and Tannery Effluent Water in Water Flea, Daphnia magna Straus by Bioassay Method

机译:生物测定法研究水蚤水蚤中重金属铬和制革废水的急性毒性

获取原文
获取原文并翻译 | 示例
           

摘要

An acute toxicity test for each metal measures the deleterious effect of an organism over a short-term exposure. Whole effluent toxicity (WET) test has been widely used overseas to assess the potential toxicity of effluents. The results of these tests can be used for a variety of functions including resource consent monitoring and compliance, toxicity identification evaluations and evaluation of effluent treatment processes. The acute toxicity study of heavy metal chromium as well as tannery effluent (chromium containing) water have been evaluated by laboratory bioassay experiments for 48 h duration in water flea, Daphnia magna Straus. The median lethal concentration (LC_(50)) value of chromium metal for 48 h duration was determined to be 0.4027 ppm. WET test confirmed median lethal concentration (LC_(50)) values of tannery effluent water for 48 h duration was 6.540% dilutions respectively. Chromium content in tannery effluent water was found 3.47 ppm which is quite higher from different water quality standards.
机译:对每种金属进行的急性毒性测试可衡量生物体在短期接触中的有害作用。整个废水毒性(WET)测试已在国外广泛用于评估废水的潜在毒性。这些测试的结果可用于多种功能,包括资源同意监测和依从性,毒性鉴定评估以及废水处理过程的评估。通过实验室生物测定实验,对水蚤(Daphnia magna Straus)中48 h的重金属铬和制革废水(含铬)的急性毒性研究进行了评估。铬金属在48小时内的平均致死浓度(LC_(50))值确定为0.4027 ppm。 WET测试确认制革厂废水在48小时内的平均致死浓度(LC_(50))值分别为6.540%稀释度。制革厂废水中的铬含量为3.47 ppm,根据不同的水质标准,该含量要高得多。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号