首页> 外文期刊>Applied Surface Science >Ultra fast melting process in femtosecond laser crystallization of thin a-Si layer
【24h】

Ultra fast melting process in femtosecond laser crystallization of thin a-Si layer

机译:飞秒激光结晶薄a-Si层中的超快熔化工艺

获取原文
获取原文并翻译 | 示例
           

摘要

In this paper, we investigated the mechanism of crystallization induced by femtosecond laser irradiation for an amorphous Si (a-Si) thin layer on a crystalline Si (c-Si) substrate. The fundamental, SHG, THG wavelength of a Ti:Sapphire laser was used for the crystallization process. To investigate the processed areas we performed Laser Scanning Microscopy (LSM), Transmission Electron Microscopy (TEM) and Imaging Pump-Probe measurements. Except for 267 nm femtosecond laser irradiation, the crystallization occurred well. The threshold fluences for the crystallization using 800 nm and 400 nm femtosecond laser irradiations were 100 mJ/cm~2 and 30 mJ/cm~2, respectively. TEM observation revealed that the crystallization occurred by epitaxial growth from the boundary surface between the a-Si layer and c-Si substrate. The melting depths estimated by Imaging Pump-Probe measurements became shallower when the shorter wavelength was used.
机译:在本文中,我们研究了飞秒激光辐照在结晶Si(c-Si)衬底上形成非晶Si(a-Si)薄层的结晶机理。 Ti:Sapphire激光器的基本SHG THG波长用于结晶过程。为了调查加工区域,我们进行了激光扫描显微镜(LSM),透射电子显微镜(TEM)和成像泵浦探针测量。除267 nm飞秒激光照射外,结晶良好。使用800 nm和400 nm飞秒激光辐照进行结晶的阈值注量分别为100 mJ / cm〜2和30 mJ / cm〜2。 TEM观察表明,结晶是通过从a-Si层和c-Si衬底之间的边界表面外延生长而发生的。当使用较短的波长时,通过Imaging Pump-Probe测量估计的熔化深度会变浅。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号