...
首页> 外文期刊>Acta Metallurgica et Materialia >SULFUR-INDUCED DYNAMIC EMBRITTLEMENT IN A LOW-ALLOY STEEL
【24h】

SULFUR-INDUCED DYNAMIC EMBRITTLEMENT IN A LOW-ALLOY STEEL

机译:低合金钢中的硫诱导动态压痕

获取原文
获取原文并翻译 | 示例
           

摘要

The rate of crack growth by apparent intergranular decohesion of a statically loaded MnMoNiCr steel at 535-600℃ in vacuum was measured using the d.c. potential-drop method. Slow-displacement-rate testing of notched tensile bars at the same temperatures in an inert atmosphere was also carried out. The steel had been air-cooled from 1300℃ to simulate a weld heat-affected zone. Interrupted tests followed by low-temperature brittle fracture were used to clarify the details of the cracking process, which occurred more rapidly in some grain boundaries than in others, giving rise to oscillations in the measured crack velocity. Striations on the intergranular facets were consistent with crack growth in steps of about 0.1 μm. SEM observations indicated that the tip of the main crack had a radius on the sub-micron scale. The cracking behavior of the tensile bars was qualitatively similar to that of the CT specimens and was found to have a temperature dependence of about 55 kcal/mol. The similarity of this phenomenon to cracking in other alloy systems is pointed out. The three contending models for the brittle mode of stress-relief cracking are compared in the light of the present results; a detailed treatment of a proposed theory is given in a separate paper.
机译:使用d.c测量了在535-600℃真空条件下静态加载的MnMoNiCr钢在表观晶间脱粘的裂纹扩展速率。电位降法。在惰性气氛下,在相同温度下对带缺口的拉伸杆进行慢速位移测试。对该钢进行了1300℃的风冷,以模拟焊接热影响区。中断测试后再进行低温脆性断裂,以弄清裂纹过程的细节,裂纹在某些晶界中的发生比在其他晶界中的发生得更快,从而导致测得的裂纹速度发生振荡。晶粒间小平面上的条纹与裂纹的扩展相一致,步长约为0.1μm。 SEM观察表明,主裂纹的尖端具有亚微米级的半径。拉伸棒的开裂行为在质量上与CT试样相似,并且发现其温度依赖性约为55 kcal / mol。指出了这种现象与其他合金系统中裂纹的相似性。根据目前的结果,比较了脆性应力释放裂纹的三种竞争模型。在另一篇论文中详细介绍了所提出的理论。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号