...
首页> 外文期刊>Acta Biotheoretica >An Evolutionary Scenario For The Origin Of Pentaradial Echinoderms—Implications From The Hydraulic Principles Of Form Determination
【24h】

An Evolutionary Scenario For The Origin Of Pentaradial Echinoderms—Implications From The Hydraulic Principles Of Form Determination

机译:radi骨棘皮动物起源的进化方案—从形式确定的水力原理中得到的启示

获取原文
获取原文并翻译 | 示例
           

摘要

The early evolutionary history of echinoderms was reconstructed on the basis of structural-functional considerations and application of the quasi-engineering approach of ‘Konstruktions-Morphologie’. According to the presented evolutionary scenario, a bilaterally symmetrical ancestor, such as an enteropneust-like organism, became gradually modified into a pentaradial echinoderm by passing through an intermediate pterobranch-like stage. The arms of a pentaradial echinoderm are identified as hydraulic outgrowths from the central coelomic cavity of the bilateral ancestor which developed due to a shortening of the body in length but widening in the diameter. The resulting pentaradial symmetry is a consequence of mechanical laws that dictate minimal contact surface areas among hydraulic pneumatic entities. These developed in the coelomic cavity (metacoel) in the bilaterally symmetrical ancestor, when from the already U-shaped mesentery with the intestinal tract two additional U-shaped bows developed directly or subsequently. During the subsequent development tensile chords of the mesentery ‘sewed’ the gut with the body wall first in three and secondly in five ‘seams’. During the direct development five ‘seams’ between tensile chords and body wall developed straightly. These internal tensile chords subdivide the body coelom into five hydraulic subsystems (‘pneus’), which eventually arrange in a pentaradial pattern. The body could then enlarge only between the tensile chords, which means that five hydraulic bulges developed. These bulges initially supported the tentacles and finally each of them enclosed the tentacle until only the feather-like appendages of the tentacles projected over the surface. The tentacles with their feathers were transformedinto the ambulacral system, and the bulges become the arms. These morphological transformations were accompanied and partly determined by specific histological modifications, such as the development of mutable connective tissues and skeletal elements that fused to ossicles and provided shape stabilization in form of a calcareous skeleton in the body wall. The organism resulted was an ancestral echinoderm (‘Ur-Echinoderm’) with an enlarged metacoel, stabilized by hydraulic pressure working againsta capsule of mutable connective tissue, skeletal elements and longitudinal muscles. In regard to these reconstructions, the body structure of echinoderms can be understood as a hydraulic skeletal capsule.
机译:棘皮动物的早期进化史是根据结构功能的考虑和“ Konstruktions-Morphologie”的准工程方法的应用而重建的。根据提出的进化方案,双侧对称祖先,例如肠神经元样生物,通过经过一个中间的ero状分支阶段,逐渐被修饰为五radi棘皮动物。五radi棘皮动物的臂被认为是双侧祖先中央腔腔的水生产物,这是由于身体长度缩短而直径增大而形成的。五边形的对称性是机械定律的结果,该定律规定了液压气动实体之间的最小接触表面积。这些在双侧对称祖先的腔腔(metacoel)中形成,这时从已经带有肠道的U型肠系膜中直接或随后又形成了另外两个U型弓。在随后的开发过程中,肠系膜的拉紧弦首先以三分之二“缝制”了与肠壁的肠道,其次是在五个“缝”中进行了缝合。在直接开发过程中,拉力弦和车身壁之间的五个“接缝”直线发展。这些内部的拉力弦将人体腔细分为五个液压子系统(“气动”),这些子系统最终以五角形排列。这样,车身只能在拉伸弦之间增大,这意味着会形成五个液压凸起。这些凸起最初支撑着触手,最后它们中的每一个都包围了触手,直到触手的羽毛状附肢伸出表面为止。触着羽毛的触角被转变成非球状系统,凸出部分变成了手臂。这些形态转化伴随并部分地由特定的组织学修饰决定,例如易变的结缔组织和融合到小骨的骨骼元素的发展,并以钙质骨架的形式在体壁中提供了形状稳定性。产生的生物是祖先的棘皮动物(Ur-Echinoderm),其上皮细胞增大,并通过液压作用于易变结缔组织,骨骼元素和纵肌的胶囊而稳定。关于这些重建,棘皮动物的身体结构可以理解为液压骨骼囊。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号