首页> 美国卫生研究院文献>Sensors (Basel Switzerland) >A Low-Power High-Data-Transmission Multi-Lead ECG Acquisition Sensor System
【2h】

A Low-Power High-Data-Transmission Multi-Lead ECG Acquisition Sensor System

机译:低功耗高数据传输多导心电图采集传感器系统

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

This study presents a low-power multi-lead wearable electrocardiogram (ECG) signal sensor system design that can simultaneously acquire the electrocardiograms from three leads, I, II, and V1. The sensor system includes two parts, an ECG test clothing with five electrode patches and an acquisition device. Compared with the traditional 12-lead wired ECG detection instrument, which limits patient mobility and needs medical staff assistance to acquire the ECG signal, the proposed vest-type ECG acquisition system is very comfortable and easy to use by patients themselves anytime and anywhere, especially for the elderly. The proposed study incorporates three methods to reduce the power consumption of the system by optimizing the micro control unit (MCU) working mode, adjusting the radio frequency (RF) parameters, and compressing the transmitted data. In addition, Huffman lossless coding is used to compress the transmitted data in order to increase the sampling rate of the acquisition system. It makes the whole system operate continuously for a long period of time and acquire abundant ECG information, which is helpful for clinical diagnosis. Finally, a series of tests were performed on the designed wearable ECG device. The results have demonstrated that the multi-lead wearable ECG device can collect, process, and transmit ECG data through Bluetooth technology. The ECG waveforms collected by the device are clear, complete, and can be displayed in real-time on a mobile phone. The sampling rate of the proposed wearable sensor system is 250 Hz per lead, which is dependent on the lossless compression scheme. The device achieves a compression ratio of 2.31. By implementing a low power design on the device, the resulting overall operational current of the device is reduced by 37.6% to 9.87 mA under a supply voltage of 2.1 V. The proposed vest-type multi-lead ECG acquisition device can be easily employed by medical staff for clinical diagnosis and is a suitable wearable device in monitoring and nursing the off-ward patients.
机译:这项研究提出了一种低功率多导联可穿戴心电图(ECG)信号传感器系统设计,该系统可以同时从I,II和V1三个导联获取心电图。传感器系统包括两个部分,一个带有五个电极贴片的ECG测试服和一个采集设备。与传统的12导联有线ECG检测仪器相比,该仪器限制了患者的活动能力,并且需要医务人员的帮助来获取ECG信号,与之相比,所建议的背心式ECG采集系统非常舒适,易于患者随时随地使用,尤其是对于老年人。拟议的研究通过优化微控制单元(MCU)的工作模式,调整射频(RF)参数以及压缩传输的数据,结合了三种减少系统功耗的方法。此外,霍夫曼无损编码用于压缩传输的数据,以提高采集系统的采样率。它使整个系统能够长时间连续运行并获得丰富的ECG信息,有助于临床诊断。最后,在设计的可穿戴式ECG设备上进行了一系列测试。结果表明,多引线可穿戴式ECG设备可以通过蓝牙技术收集,处理和传输ECG数据。设备收集的ECG波形清晰,完整,可以在手机上实时显示。所提出的可穿戴传感器系统的采样率为每根导线250 Hz,这取决于无损压缩方案。该设备的压缩比为2.31。通过在器件上实现低功耗设计,在2.1 V的电源电压下,器件的整体工作电流降低了37.6%,降至9.87 mA。所建议的背心型多引脚ECG采集器件可轻松用于医务人员进行临床诊断,是监视和护理病态患者的合适可穿戴设备。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号