首页> 美国卫生研究院文献>Membranes >Effects of Room Temperature Stretching and Annealing on the Crystallization Behavior and Performance of Polyvinylidene Fluoride Hollow Fiber Membranes
【2h】

Effects of Room Temperature Stretching and Annealing on the Crystallization Behavior and Performance of Polyvinylidene Fluoride Hollow Fiber Membranes

机译:室温拉伸和退火对聚偏氟乙烯中空纤维膜结晶行为和性能的影响

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

A treatment consisting of room temperature stretching and subsequent annealing was utilized to regulate the morphology and performance of polyvinylidene fluoride (PVDF) hollow fiber membranes. The effects of stretching ratios and stretching rates on the crystallization behavior, morphology, and performance of the PVDF membranes were investigated. The results showed that the treatment resulted in generation of the β crystalline phase PVDF and increased the crystallinity of the membrane materials. The treatment also brought about the orientation of the membrane pores along the stretching direction and led to an increase in the mean pore size of the membranes. In addition, as the stretching ratio increased, the tensile strength and permeation flux were improved while the elongation at break was depressed. However, compared to the stretching ratio, the stretching rate had less influence on the membrane structure and performance. In general, as the stretching ratio was 50% and the stretching rate was 20 mm/min, the tensile strength was increased by 36% to 7.47 MPa, and the pure water flux was as high as 776.28 L/(m ·h·0.1bar), while the mean pore size was not changed significantly. This research proved that the room temperature stretching and subsequent annealing was a simple but effective method for regulating the structure and the performance of the PVDF porous membranes.
机译:利用室温拉伸和随后的退火处理来调节聚偏二氟乙烯(PVDF)中空纤维膜的形态和性能。研究了拉伸比和拉伸速率对PVDF膜结晶行为,形态和性能的影响。结果表明,该处理导​​致β晶相PVDF的产生并增加了膜材料的结晶度。该处理还引起了膜孔沿拉伸方向的取向,并导致了膜的平均孔径的增加。另外,随着拉伸比的增加,抗张强度和渗透通量得到改善,而断裂伸长率降低。然而,与拉伸比相比,拉伸速率对膜结构和性能的影响较小。通常,当拉伸比为50%且拉伸速度为20mm / min时,拉伸强度增加36%至7.47MPa,并且纯水通量高达776.28L /(m·h·0.1)。 bar),而平均孔径没有明显变化。这项研究证明,室温拉伸和随后的退火是调节PVDF多孔膜结构和性能的简单而有效的方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号