首页> 美国卫生研究院文献>Medical Physics >Estimating nonrigid motion from inconsistent intensity with robust shape features
【2h】

Estimating nonrigid motion from inconsistent intensity with robust shape features

机译:通过不一致的强度和坚固的形状特征来估计非刚性运动

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

>Purpose: To develop a nonrigid motion estimation method that is robust to heterogeneous intensity inconsistencies amongst the image pairs or image sequence.>Methods: Intensity and contrast variations, as in dynamic contrast enhanced magnetic resonance imaging, present a considerable challenge to registration methods based on general discrepancy metrics. In this study, the authors propose and validate a novel method that is robust to such variations by utilizing shape features. The geometry of interest (GOI) is represented with a flexible zero level set, segmented via well-behaved regularized optimization. The optimization energy drives the zero level set to high image gradient regions, and regularizes it with area and curvature priors. The resulting shape exhibits high consistency even in the presence of intensity or contrast variations. Subsequently, a multiscale nonrigid registration is performed to seek a regular deformation field that minimizes shape discrepancy in the vicinity of GOIs.>Results: To establish the working principle, realistic 2D and 3D images were subject to simulated nonrigid motion and synthetic intensity variations, so as to enable quantitative evaluation of registration performance. The proposed method was benchmarked against three alternative registration approaches, specifically, optical flow, B-spline based mutual information, and multimodality demons. When intensity consistency was satisfied, all methods had comparable registration accuracy for the GOIs. When intensities among registration pairs were inconsistent, however, the proposed method yielded pronounced improvement in registration accuracy, with an approximate fivefold reduction in mean absolute error (MAE = 2.25 mm, SD = 0.98 mm), compared to optical flow (MAE = 9.23 mm, SD = 5.36 mm), B-spline based mutual information (MAE = 9.57 mm, SD = 8.74 mm) and mutimodality demons (MAE = 10.07 mm, SD = 4.03 mm). Applying the proposed method on a real MR image sequence also provided qualitatively appealing results, demonstrating good feasibility and applicability of the proposed method.>Conclusions: The authors have developed a novel method to estimate the nonrigid motion of GOIs in the presence of spatial intensity and contrast variations, taking advantage of robust shape features. Quantitative analysis and qualitative evaluation demonstrated good promise of the proposed method. Further clinical assessment and validation is being performed.
机译:>目的:开发一种非刚性运动估计方法,该方法对于图像对或图像序列之间的异质强度不一致具有鲁棒性。>方法:强度和对比度变化,如动态对比度增强磁共振成像对基于一般差异度量的配准方法提出了巨大挑战。在这项研究中,作者提出并验证了一种通过利用形状特征对这种变化具有鲁棒性的新颖方法。感兴趣的几何(GOI)用灵活的零级集表示,该零级集通过行为良好的正则化优化进行了细分。优化能量将零水平设置为高图像梯度区域,并使用面积和曲率先验对其进行正则化。即使在存在强度或对比度变化的情况下,所得到的形状也显示出高一致性。随后,进行多尺度非刚性配准以寻找规则形变场,以最小化GOIs附近的形状差异。>结果:为了建立工作原理,对真实的2D和3D图像进行了模拟的非刚性运动和合成强度变化,以便能够定量评估配准性能。所提出的方法针对三种替代配准方法进行了基准测试,特别是光流,基于B样条的互信息和多模态恶魔。当强度一致性得到满足时,所有方法对GOI的配准精度均具有可比性。但是,当配准对之间的强度不一致时,与光流(MAE = 9.23 mm)相比,所提出的方法可显着提高配准精度,平均绝对误差(MAE = 2.25 mm,SD = 0.98 mm)降低约五倍。 ,SD = 5.36毫米),基于B样条的互信息(MAE = 9.57毫米,SD = 8.74毫米)和多模态恶魔(MAE = 10.07毫米,SD = 4.03毫米)。将所提出的方法应用于真实的MR图像序列还提供了定性吸引的结果,证明了所提出方法的良好可行性和适用性。>结论:作者开发了一种新颖的方法来估计GOI在运动中的非刚性运动。利用鲁棒的形状特征,实现空间强度和对比度变化。定量分析和定性评估证明了该方法的良好前景。正在进行进一步的临床评估和验证。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号