首页> 美国卫生研究院文献>Molecules >Simultaneous Screening of Major Flame Retardants and Plasticizers in Polymer Materials Using Pyrolyzer/Thermal Desorption Gas Chromatography Mass Spectrometry (Py/TD–GC–MS)
【2h】

Simultaneous Screening of Major Flame Retardants and Plasticizers in Polymer Materials Using Pyrolyzer/Thermal Desorption Gas Chromatography Mass Spectrometry (Py/TD–GC–MS)

机译:使用热解仪/热脱附气相色谱质谱仪(Py / TD-GC-MS)同时筛选聚合物材料中的主要阻燃剂和增塑剂

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

This study was conducted with the aim of achieving the simultaneous screening of various additives in polymer materials by utilizing a solvent-free pyrolyzer/thermal desorption gas chromatography mass spectrometry (Py/TD-GC–MS) method. As a first step to achieve this goal, simultaneous screening has been examined by selecting major substances representing plasticizers and flame retardants, such as short chain chlorinated paraffins (SCCPs), decabromodiphenyl ether (DecaBDE), hexabromocyclododecane (HBCDD), and di(2-ethylhexyl) phthalate (DEHP). A quantitative MS analysis was performed to check for the peak areas and sensitivities. Since Py/TD-GC–MS is fraught with the risk of thermal degradation of the sample, temperatures during the analytical process were finely tuned for securing reliable results. The instrumental sensitivity was confirmed by the S/N ratio on each component. The detection limits of all components were less than 50 mg/kg, which are sufficiently lower than the regulatory criteria. With regard to reproducibility, a relative standard deviation (RSD) of about 5% was confirmed by employing a spike recovery test on a polystyrene polymer solution containing mixed standard solution (ca. 1000 mg/kg). In conclusion, the results obtained in this study indicate that Py/TD-GC–MS is applicable for the screening of major flame retardants and plasticizers in real samples with sufficient reproducibility at regulatory levels.
机译:进行这项研究的目的是通过利用无溶剂热解器/热脱附气相色谱质谱法(Py / TD-GC-MS)来同时筛选聚合物材料中的各种添加剂。作为实现此目标的第一步,已经通过选择代表增塑剂和阻燃剂的主要物质,如短链氯化石蜡(SCCP),十溴二苯醚(DecaBDE),六溴环十二烷(HBCDD)和二(2-邻苯二甲酸乙基己基酯(DEHP)。进行了定量MS分析,以检查峰面积和灵敏度。由于Py / TD-GC-MS充满样品热降解的风险,因此对分析过程中的温度进行了微调,以确保获得可靠的结果。仪器灵敏度通过每个组件上的信噪比确定。所有成分的检出限均低于50 mg / kg,这远远低于监管标准。关于重现性,通过对包含混合标准溶液(约1000 mg / kg)的聚苯乙烯聚合物溶液进行加标回收试验,确认相对标准偏差(RSD)约为5%。总之,本研究获得的结果表明,Py / TD-GC-MS可用于筛查真实样品中的主要阻燃剂和增塑剂,并且在法规水平上具有足够的重现性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号