首页> 美国卫生研究院文献>ACS Omega >Isothermal Crystallization Process of Poly(l-lacticacid)/Poly(d-lactic acid) Blends afterRapid Cooling from the Melt
【2h】

Isothermal Crystallization Process of Poly(l-lacticacid)/Poly(d-lactic acid) Blends afterRapid Cooling from the Melt

机译:聚乳酸的等温结晶过程酸)/聚(d-乳酸)混合后熔体快速冷却

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

We observed the crystallization process in poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) blends using in situ simultaneous small- and wide-angle X-ray scattering measurements with a high-speed temperature control cell. In situ X-ray scattering measurements revealed that density fluctuations larger than the long spacing periods grew during crystallization above 130 °C. In particular, the time evolution of the density fluctuations has a strong dependence on the crystallization temperature. The density fluctuations will promote the crystal nucleation and growth processes of the stereocomplex and increase with increasing crystallization temperature, which is strongly correlated with the complexation of PLLA and PDLA chains. On the other hand, below 120 °C, the kinetics of stereocomplex formation might be hindered by the decreased mobility, and no density fluctuations were observed in the case of homo crystal growth of PLLA or PDLA.
机译:我们使用原位同时进行小角度和广角X射线散射测量以及高速温度控制,观察了聚(l-乳酸)(PLLA)和聚(d-乳酸)(PDLA)共混物的结晶过程细胞。原位X射线散射测量表明,在130°C以上的结晶过程中,密度波动大于长间隔时间,波动更大。特别地,密度波动的时间演变强烈依赖于结晶温度。密度波动将促进立体复合物的晶体成核和生长过程,并随着结晶温度的升高而增加,这与PLLA和PDLA链的复合密切相关。另一方面,在低于120°C时,降低的迁移率可能会阻碍立体复合物形成的动力学,在PLLA或PDLA的均质晶体生长情况下,未观察到密度波动。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号