Origin 8软件在弹簧振子和惯性秤中的应用

摘要

The Origin software was used to study the relation of the square of vibration period (T2)and the mass (m). The correction factor of the springs (C) was also studied. The result showed that the correction factor of the springs (C) was depended on the shape of the springs which has not a generality character. The results of experiment was more intuitive, simple and fitting of smooth curvecan which meet the requirements of the experiment by the Origin software.%采用Origin软件研究了惯性称和弹簧振子的振动周期T2和质量m的关系以及不同形状的弹簧修正系数C的关系。通过Origin软件拟合可以得到符合实验要求的光滑曲线，使得实验结果处理更加直观和简便。实验结果表明，弹簧的修正系数C和弹簧的形状有关，不具有普适性。