以己烷为碳源,二茂铁为催化剂前躯体,应用喷雾热解法,制备了多壁碳纳米管(MWCNTs).采用酸沥滤和空气氧化对MWCNTs进行纯化.利用SEM、TEM、XRD、EDS、TGA及Raman光谱分析等方法分别对原生和纯化MWCNTs进行表征.为制得优质、高产MWCNTs,对制备工艺参数作了优选,分别研讨了最佳制备参数,包括:二茂铁升华温度、己烷中二茂铁浓度、热解温度和时间,己烷与H2的流量比.MWCNTs具有典型的腊肠状(Sawsage-like)构型,长度大于数十微米,内、外管径分别为15nm～45nm及25nm～70nm,MWCNTs的纯度和产率的质量分数分别高于95%和70%.%Multi-walled carbon nanotubes (MWCNTs) were prepared by spray pyrolysis, using hexane as a carbon source and ferrocene as a catalyst precursor, followed by purification with acid leaching and air oxidation. The as-grown and purified MWCNTs were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, energy dispersive spectroscopy, thermogravimetry, and Raman spectroscopy. The sublimation temperature of ferrocene, the ferrocene concentration in hexane, pyrolysis temperature and time, and the flow rate of hexane and H2 were optimized to obtain MWCNTs with a high quality and a high yield. The MWCNTs have a typical sausage-like structure and their lengths are more than several tens of micrometers. The inner and outer diameters of the MWCNTs were in the range of 15-45 and 25-70 nm, respectively. The purity and yield of the purified MWCNTs were more than 95% and 70% mass fraction, respectively.
展开▼
