Preparation and Characterization of Refuse Derived Fuel for Pyrolysis and Gasification by Bindless High Pressure Briquetting Technology

摘要

A new type of refuse derived fuel (RDF) for pyrolysis and gasification was prepared from municipal solid waste (MSW) in the presence of a small quantity of coal by bindless high pressure technology at room temperature. The physicochemical property of RDF was tested. Orthogonal experiment method was used to optimize the process parameters using dropping strength (mechanical strength) and thermal stability of the RDF as indices for quality of RDF. The result shows that the mixture of MSW and coal with a total moisture ranging from 5% to 17% can be easily compressed into RDF briquettes at a pressure above 70 MPa. When the briquetting pressure is higher than 100 kN and moisture content is about 10%, the qualified RDF can be obtained. The orthogonal experiment shows that the moisture can greatly affect the mechanical strength of RDF, while all the technique parameters have no obvious influence on thermal stability of RDF. The optimal parameters are a shaping pressure of 106 MPa, a moisture content of 10%, and a coal content of 20%.