Principal axes of M-DOF structures PartⅡ:Dynamic loading

摘要

This paper is the second in a two-part series that discusses the principal axes of M-DOF structures subjected to static and dynamic loads. The primary purpose of this series is to understand the magnitude of the dynamic response of structures to enable better design of structures and response modification devices/systems. Under idealized design conditions, the structural responses are obtained by using single direction input ground motions in the direction of the intended response modification devices/systems, and by assuming that the responses of the structure is decoupleable in three mutually perpendicular directions. This standard practice has been applied to both new and retrofitted structures using various seismic protective systems. Very limited information is available on the effects of neglecting the impact of directional couplings (cross effects of which torsion is a component) of the dynamic response of structures. In order to quantify such effects, it is necessary to examine the principal axes of structures under both static and dynamic loading. In this two-part series, the first paper is concerned with static loading, which provides definitions and fundamental formulations, with the conclusion that cross effects of a statically loaded M-DOF structure resulting from the lack of principal axes are of insignificant magnitude. However, under dynamic or earthquake loading, a relatively small amount of energy transferred across perpendicular directions is accumulated, which may result in significant enlargement of the structural response. This paper deals with a formulation to define the principal axes of M-DOF structures under dynamic loading and develops quantitative measures to identify cross effects resulting from the non-existence of principal axes.