Objective To design a set of washing unit to avoid sharp touching of surgical instruments with each other, and to guarantee the quality of cleaning and disinfection of surgical instruments for sterilizing and supplying department in hospital. Methods The stainless steel bar was bent into a u-shaped frame, which could be added on a u-shaped frame support to make instruments can be put into this frame. According to surgical instruments size and different requirements, we designed three sets of u-shaped frames, which could be cooperated to use with three u-shaped frame supports. Results The use of U-shaped frame and support played a good role in cleaning thoroughly the water-insoluble contaminants on the surgical instruments, such as blood, pus and body fluids, Conclusion The use of U-shaped frame and support changes the insufficiency of the traditional inadequate cleaning method. It can also reduce labor intensity, improve work efficiency and is suitable for large scale using.[Chinese Medical Equipment Journal,2011,32(3):35,37]%目的:设计用于医院消毒供应室清洗手术钳与手术剪的手术器械清洗装置,避免手术器材的锐利面相互接触,保证清洗、消毒质量.方法:将不锈钢条弯曲成U型,使之可以放入U型架座上,使器械可以一件件串入U型架上.根据手术器械大小与要求不同,设计了3套U型架.并均可与3种U型架座配合使用.结果:U型架及架座的使用对于彻底清洗手术器械上的血液、脓液、体液等非水溶性污物起到了很好的作用.结论:改变了过去传统清洗方法清洗不到位的不足,减轻了劳动强度,提高了工作效率.
展开▼
