首页> 外文学位 >Very High Cycle Fatigue Behavior of Laser Beam-Powder Bed Fused Inconel 718 Considering the Layer Orientation and Surface Finish Effects

【24h】

Very High Cycle Fatigue Behavior of Laser Beam-Powder Bed Fused Inconel 718 Considering the Layer Orientation and Surface Finish Effects

机译：考虑到层取向和表面光洁度效果，激光束粉床融合的非常高的循环疲劳行为融合了718

获取原文

获取原文并翻译 | 示例

页面导航

著录项
相似文献
相关主题

著录项

作者
Frye, Palmer R.;
展开▼
作者单位

University of North Florida.;

展开▼
授予单位 University of North Florida.;
学科
学位 M.S.M.E.
年度 2020
页码 99 p.
总页数 99
原文格式 PDF
正文语种 eng
中图分类 AAI28188636;
关键词

相似文献

外文文献
中文文献
专利

1. Influence of surface conditions and specimen orientation on high cycle fatigue properties of Inconel 718 prepared by laser powder bed fusion [J] . David B. Witkin, Dhruv Patel, Thomas V. Albright, International Journal of Fatigue . 2020,第Mara期

机译：表面条件和试样取向对激光粉末床熔合Inconel 718高循环疲劳性能的影响
2. On the influence of heat treatment on microstructure and mechanical behavior of laser powder bed fused Inconel 718 [J] . Jakob Schroeder, Tatiana Mishurova, Tobias Fritsch, Materials Science and Engineering . 2021,第Feba23期

机译：关于热处理对激光粉末融合的微观结构和力学行为的影响718
3. An investigation into the effects of cyclic strain rate on the high cycle and very high cycle fatigue behaviors of wrought and additively manufactured Inconel 718 [J] . Muztahid Muhammad, Palmer Frye, Jutima Simsiriwong, International Journal of Fatigue . 2021,第Mara期

机译：循环应变速率对锻造和加剧制造的高循环疲劳行为的影响718
4. Effects of Surface Preparation, Support Structures and Build Orientation on the Cyclic Stress-Strain Behavior of Inconel 718 Produced by SLM [C] . Matilde Scurria, Benjamin Moller, Rainer Wagener, SAE World Congress Experience . 2019

机译：表面制备，支撑结构和构建取向对SLM产生的第718族的循环应力 - 应变行为的影响
5. Effects of Increasing Layer Thickness in the Laser Powder Bed Fusion of Inconel 718 [D] . Patil, Dhiraj Amar. 2019

机译：厚度在818的激光粉床中增加层厚度的影响
6. Very-High-Cycle Fatigue Behavior of Inconel 718 Alloy Fabricated by Selective Laser Melting at Elevated Temperature [O] . Zongxian Song, Wenbin Gao, Dongpo Wang, 2021

机译：通过选择性激光熔化在升高的温度下通过选择性激光熔化制造的Inconel 718合金的非常高循环疲劳行为
7. Fatigue short crack propagation behavior of selective laser melted Inconel 718 alloy by in-situ SEM study: Influence of orientation and temperature [O] . X.F. Ma, H.L. Zhai, L. Zuo, 2020

机译：选择性激光熔化的疲劳短裂纹传播行为通过原位SEM研究：取向和温度的影响
8. Probabilistic Material Strength Degradation Model for Inconel 718 ComponentsSubjected to High Temperature, High-Cycle and Low-Cycle Mechanical Fatigue, Creep and Thermal Fatigue Effects [R] . 1995

机译：Inconel 718组件的概率材料强度退化模型受高温，高循环和低循环机械疲劳，蠕变和热疲劳影响

Very High Cycle Fatigue Behavior of Laser Beam-Powder Bed Fused Inconel 718 Considering the Layer Orientation and Surface Finish Effects

著录项

相似文献

相关主题

期刊订阅