首页> 外文学位 >Waterflood management of the Lunde formation in Gullfaks main field using streamline simulation.
【24h】

Waterflood management of the Lunde formation in Gullfaks main field using streamline simulation.

机译:使用流线模拟对古尔法克斯主油田隆德地层进行注水管理。

获取原文
获取原文并翻译 | 示例

摘要

Gullfaks field, offshore Norway, has been under operation since June 1978, when block 34/10 was awarded to Statoil, Norsk Hydro and Saga Petroleum. The initial recoverable reserve was estimated at 2.1 billion barrels of oil. The reservoir is heterogeneous with permeability ranging from milli to several Darcy. Currently, Gullfaks field is facing decline curve challenges in terms of production. However, with the recovery factor being as high as 56% Gullfaks is in the forefront of hydrocarbon production in offshore Europe.;In this study, streamline simulation is applied to Gullfaks main-field Waterflood management is observed by selecting an appropriate pattern for the injector and producer well using publicly available data of Lunde formation in the Gullfaks field.;Optimization of water-flood is a critical process for reservoir management. This is achieved through water injection. To optimize the water injection scenario an appropriate water injection pattern should be employed that focuses on the pockets of remaining oil in the area of interest. Streamline simulation provides a workflow for the optimization of waterflood identifying distribution of injected water to related producers, water loss to the aquifer and percentage of oil recovered as a result of contribution made by each water injector. The use of 3D streamline methodology is a complimentary tool to finite difference simulation and has received significant attention over the past several years.
机译:挪威海上的Gullfaks油田自1978年6月开始运营,当时将34/10号区块授予了Statoil,Norsk Hydro和Saga Petroleum。最初的可采储量估计为21亿桶石油。储层是非均质的,渗透率范围从毫达西到几个达西。当前,Gullfaks油田在产量方面面临下降曲线挑战。但是,由于高达56%的采收率,Gullfaks处于欧洲近海油气生产的最前沿。在本研究中,通过为喷油器选择合适的模式,将流线模拟应用于Gullfaks主油田注水管理。 ;利用Gullfaks油田Lunde形成的公开数据获得生产井。注水优化是储层管理的关键过程。这是通过注水实现的。为了优化注水方案,应采用适当的注水模式,重点关注感兴趣区域中剩余油的储层。流线模拟为优化注水量提供了工作流程,以识别注入到相关生产者的水的分布,含水层的水分流失以及由于每个注水器的贡献而回收的油的百分比。 3D简化方法的使用是有限差分仿真的一种补充工具,并且在过去几年中受到了广泛的关注。

著录项

  • 作者

    Ahmed, Syed Waqas.;

  • 作者单位

    Dalhousie University (Canada).;

  • 授予单位 Dalhousie University (Canada).;
  • 学科 Engineering Petroleum.
  • 学位 M.Eng.
  • 年度 2009
  • 页码 83 p.
  • 总页数 83
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 非洲史;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号