首页> 外文学位 >Air-kerma strength determination of a miniature x-ray source for brachytherapy applications.
【24h】

Air-kerma strength determination of a miniature x-ray source for brachytherapy applications.

机译:用于近距离放射治疗应用的微型X射线源的空气比释动能强度测定。

获取原文
获取原文并翻译 | 示例

摘要

A miniature x-ray source has been developed by Xoft Inc. for high dose-rate brachytherapy treatments. The source is contained in a 5.4 mm diameter water-cooling catheter. The source voltage can be adjusted from 40 kV to 50 kV and the beam current is adjustable up to 300 muA. Electrons are accelerated toward a tungsten-coated anode to produce a lightly-filtered bremsstrahlung photon spectrum. The sources were initially used for early-stage breast cancer treatment using a balloon applicator. More recently, Xoft Inc. has developed vaginal and surface applicators.;The miniature x-ray sources have been characterized using a modification of the American Association of Physicists in Medicine Task Group No. 43 formalism normally used for radioactive brachytherapy sources. Primary measurements of air kerma were performed using free-air ionization chambers at the University of Wisconsin (UW) and the National Institute of Standards and Technology (NIST). The measurements at UW were used to calibrate a well-type ionization chamber for clinical verification of source strength.;Accurate knowledge of the emitted photon spectrum was necessary to calculate the corrections required to determine air-kerma strength, defined in vacuo. Theoretical predictions of the photon spectrum were calculated using three separate Monte Carlo codes: MCNP5, EGSnrc, and PENELOPE. Each code used different implementations of the underlying radiological physics. Benchmark studies were performed to investigate these differences in detail. The most important variation among the codes was found to be the calculation of fluorescence photon production following electron-induced vacancies in the L shell of tungsten atoms. The low-energy tungsten L-shell fluorescence photons have little clinical significance at the treatment distance, but could have a large impact on air-kerma measurements.;Calculated photon spectra were compared to spectra measured with high-purity germanium spectroscopy systems at both UW and NIST. The effects of escaped germanium fluorescence photons and Compton-scattered photons were taken into account for the UW measurements. The photon spectrum calculated using the PENELOPE Monte Carlo code had the best agreement with the spectrum measured at NIST. Corrections were applied to the free-air chamber measurements to arrive at an air-kerma strength determination for the miniature x-ray sources.
机译:Xoft Inc.开发了一种微型X射线源,用于高剂量率近距离放射治疗。该源包含在直径为5.4毫米的水冷导管中。源电压可在40 kV至50 kV范围内调节,电子束电流可调节至300μA。电子朝着镀钨阳极加速,以产生经过轻微过滤的致辐射光子光谱。该来源最初使用气球涂药器用于早期乳腺癌治疗。最近,Xoft Inc.开发了阴道和表面涂药器。微型X射线源的特征是对美国医学物理学会协会第43号任务组形式学的修改,通常用于放射性近距离放射治疗。空气比释动能的主要测量是使用威斯康星大学(UW)和美国国家标准与技术研究院(NIST)的自由空气电离室进行的。在UW的测量结果用于校准井型电离室,以进行源强度的临床验证。;必须准确掌握发射的光子光谱,以计算确定在真空中定义的空气比释动能强度所需的校正量。使用三个独立的蒙特卡洛代码(MCNP5,EGSnrc和PENELOPE)计算光子光谱的理论预测。每个代码都使用了底层放射物理学的不同实现。进行基准研究以详细研究这些差异。发现编码中最重要的变化是计算钨原子L壳中电子诱导的空位后荧光光子的产生。低能钨L壳荧光光子在治疗距离上几乎没有临床意义,但可能对气释比测量有很大影响。;在两个UW处将计算出的光子光谱与用高纯度锗光谱系统测量的光谱进行比较和NIST。 UW测量考虑了逸出的锗荧光光子和康普顿散射光子的影响。使用PENELOPE蒙特卡洛代码计算的光子光谱与NIST测得的光谱具有最佳一致性。对自由空气室的测量值进行校正,以得出微型X射线源的空气比释动能强度。

著录项

  • 作者

    Davis, Stephen D.;

  • 作者单位

    The University of Wisconsin - Madison.;

  • 授予单位 The University of Wisconsin - Madison.;
  • 学科 Physics Radiation.;Biophysics Medical.
  • 学位 Ph.D.
  • 年度 2009
  • 页码 190 p.
  • 总页数 190
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号