首页> 外文学位 >First-principles investigation of thermodynamic and kinetic properties in titanium-hydrogen system and B2-nickel-alminum compound: Phase stability, point defect complexes and diffusion.
【24h】

First-principles investigation of thermodynamic and kinetic properties in titanium-hydrogen system and B2-nickel-alminum compound: Phase stability, point defect complexes and diffusion.

机译:钛-氢体系和B2-镍-铝化合物的热力学和动力学性质的第一性原理研究:相稳定性,点缺陷络合物和扩散。

获取原文
获取原文并翻译 | 示例

摘要

The purpose of this thesis is to show the technique of predicting thermodynamic and kinetic properties from first-principles using density functional theory (DFT) calculations, cluster expansion methods and Monte Carlo simulations instead of experiments. Two material systems are selected as examples: one is an interstitial system (Ti-H system) and another is a substitutional compound (B2-NiAl alloy).;For Ti-H system, this thesis investigated hydride stability, exploring the role of configurational degrees of freedom, zero-point vibrational energy and coherency strains. The tetragonal gamma-TiH phase was predicted to be unstable relative to hcp alpha-Ti and fcc based delta-TiH2. Zero point vibrational energy makes the gamma phase even less stable. The coherency strains between hydride precipitates and alpha-Ti matrix stabilize gamma-TiH relative to alpha-Ti and delta-TiH2. We also found that hydrogen prefers octahedral sites at low hydrogen concentration and tetrahedral sites at high concentration.;For B2-NiAl, this thesis investigated the point defects and various diffusion mechanisms. A low barrier collective hop was discovered that could mediate Al diffusion through the anti-structural-bridge (ASB) mechanism. We also found an alternative hop sequence for the migration of a triple defect and a six-jump-cycle than that proposed previously. Going beyond the mean field approximation, we found that the inclusion of interactions among point defects is crucial to predict the concentration of defect complexes. Accounting for interactions among defects and incorporating all diffusion mechanisms proposed for B2-NiAl in Monte Carlo simulation, we calculated tracer diffusion coefficients. For the first time, the relative importance of various diffusion mechanisms is revealed. The ASB hop is the dominant mechanism for Ni in Ni-rich alloy and for Al diffusion in Al-rich alloys. Other mechanisms also play a role to various extents. We also calculated the self and interdiffusion coefficients for B2-NiAl. We found in Al-rich alloys that the thermodynamic factor of Al is much greater than that of Ni while in Ni-rich alloys they are very similar. This difference in thermodynamic factors results in a much higher self-diffusion coefficient of Al compared to that of Ni in Al-rich alloys and also causes two different interdiffusion coefficients.
机译:本文的目的是展示使用密度泛函理论(DFT)计算,簇扩展方法和蒙特卡罗模拟代替实验从第一性原理预测热力学和动力学性质的技术。以两种材料体系为例:一种是间隙体系(Ti-H体系),另一种是取代化合物(B2-NiAl合金)。;对于Ti-H体系,本文研究了氢化物的稳定性,探讨了构型的作用。自由度,零点振动能和相干应变。相对于hcp alpha-Ti和基于fcc的delta-TiH2,预计四方γ-TiH相不稳定。零点振动能使伽玛相更加不稳定。氢化物沉淀物和α-Ti基质之间的相干应变使α-TiH和δ-TiH2相对稳定。我们还发现氢在低氢浓度下更喜欢八面体位点,而在高浓度下更喜欢四面体位点。对于B2-NiAl,本文研究了点缺陷和各种扩散机理。发现了一个低势垒集体跃点,它可以通过抗结构桥(ASB)机制介导Al的扩散。我们还找到了一个替代跳序列,用于迁移三重缺陷和六跳周期,这一点比以前提出的要多。超越平均场近似,我们发现点缺陷之间的相互作用的包含对于预测缺陷复合物的浓度至关重要。考虑到缺陷之间的相互作用并结合在Monte Carlo模拟中提出的针对B2-NiAl的所有扩散机制,我们计算了示踪剂扩散系数。首次揭示了各种扩散机制的相对重要性。 ASB跃变是富镍合金中Ni和富铝合金中Al扩散的主要机理。其他机制也在不同程度上发挥作用。我们还计算了B2-NiAl的自扩散系数和互扩散系数。我们发现,在富铝合金中,铝的热力学因子远大于镍,而在富镍合金中,它们的热力学因子非常相似。热力学因素的这种差异导致铝的自扩散系数比富铝合金中的镍的自扩散系数高得多,并且还导致两种不同的互扩散系数。

著录项

  • 作者

    Xu, Qingchuan.;

  • 作者单位

    University of Michigan.;

  • 授予单位 University of Michigan.;
  • 学科 Engineering Materials Science.
  • 学位 Ph.D.
  • 年度 2009
  • 页码 163 p.
  • 总页数 163
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号