首页> 外文学位 >Dual-porosity structure and bimodal hydraulic property functions for unsaturated coarse granular soils.
【24h】

Dual-porosity structure and bimodal hydraulic property functions for unsaturated coarse granular soils.

机译:非饱和粗粒土的双孔隙结构和双峰水力学特性函数。

获取原文
获取原文并翻译 | 示例

摘要

Colluvial soils, major materials for natural terrain slopes in Hong Kong and in the Three Gorges Reservoir Zone, are normally widely and gap-graded with high gravel contents and fines contents. This research focuses on (1) the hydraulic properties of such gap-graded coarse soils, which are essential in the investigation of triggering mechanisms of landslides but have seldom been studied to date, and (2) the micro-structures of such gap-graded soils, which are a key to understanding the hydraulic and mechanical behavior of gap-graded soils.;The influences of coarse contents and wetting / drying cycles on the micro-porosity structure are investigated using mercury intrusion porosimetry and scanning electron microscopy techniques. The results demonstrate that gap-graded soil with a high coarse fraction (>70%) forms a coarse-controlled, dual-porosity structure during compaction and retains this structure after wetting / drying. The gap-graded soil with a high fines content (>30%) forms a fines-controlled, dual-porosity structure (bimodal pore size distribution) during compaction, which evolves into an intra-aggregate pore structure (unimodal pore size distribution) after saturation and shows significant shrinkage during drying.;One difficulty hindering the measurement of hydraulic properties is the lack of a direct and time-saving technique for measuring the permeability function over wide suction and permeability ranges. A wetting front advancing method is developed to measure the permeability functions rapidly over a wide suction range, in which the wetting process in an unsaturated, large-scale soil column is simulated and monitored. A new analytical interpretation procedure is proposed to calculate the permeability function based on the monitored water contents and suctions. This method is applicable to a wide range of soil suctions and different soil types. Using this method, the permeability function can be measured within a few days, resulting in considerable time-saving as compared to the traditional steady-state methods and the instantaneous profile method. Another difficulty hindering the measurement of hydraulic properties is the lack of a proper technique for measuring the soil-water characteristic curve (SWCC) at extremely low suctions (i.e., 0.01 kPa to 1 kPa). A new device is developed using the axis-translation technique and a water-head control method. A new interpretation equation is proposed to reduce the test error induced by the suction difference along the sample height. Using the new device and the new interpretation equation, the measurable suction range is extended to 0.05 kPa.;The two new techniques are used to measure the hydraulic properties of five soils with different coarse contents. A typical bimodal feature is found in the SWCCs and the permeability functions for gap-graded soils with high coarse fractions. On the contrary, for soils with high fines contents, unimodal SWCCs and permeability functions are common. A new SWCC model is proposed to characterize the bimodal SWCCs. The model uses six parameters with clear physical meaning to describe the drainage process in a dual-porosity structure soil. Regression analysis is conducted on 44 cases of SWCC tests in the literature to relate the six parameters to the soil grain-size distribution and void ratio. A new bimodal permeability function model is also proposed. The bimodal permeability function model uses six meaningful parameters, which include three suction parameters from the bimodal SWCC and three permeability parameters estimated using empirical equations.;To evaluate the risk of failure of colluvial slopes upon rainfall infiltration, the measured hydraulic property functions are used in the numerical simulation of ideal slopes composed of the five soils with different coarse fractions. Simulation results demonstrate that shallow failures in slopes composed of gap-graded soils with high coarse fractions can be easily triggered during a high-intensity rainstorm.
机译:冲积土是香港和三峡库区自然地形斜坡的主要材料,通常分布较广,间隙分级,砾石含量高,细粉含量高。这项研究的重点是(1)这种间隙分级的粗土的水力学特性,这对于研究滑坡的触发机制是必不可少的,但迄今为止尚未进行过深入的研究;(2)这种间隙分级的粗土的微观结构。土壤;这是理解间隙梯度土壤的水力和力学行为的关键。;使用压汞法和扫描电子显微镜技术研究了粗含量和润湿/干燥周期对微孔结构的影响。结果表明,具有较高粗度(> 70%)的间隙分级土壤在压实过程中形成了粗度控制的双孔隙结构,并在润湿/干燥后保留了该结构。具有高细度含量(> 30%)的间隙分级土壤在压实过程中形成细度受控的双孔隙结构(双峰孔径分布),在压实后演变为集料内部的孔隙结构(单峰孔径分布)饱和,并在干燥过程中显示出明显的收缩。;阻碍水力特性测量的一个困难是缺乏直接且省时的技术来在宽的吸力和渗透率范围内测量渗透率函数。提出了一种湿润前沿推进方法,以在较宽的吸力范围内快速测量渗透率函数,该方法模拟并监测了非饱和大型土柱中的湿润过程。提出了一种新的解析解释程序,用于基于监测到的水含量和吸力来计算渗透率函数。该方法适用于各种土壤吸力和不同土壤类型。使用此方法,可以在几天内测量磁导率函数,与传统的稳态方法和瞬时轮廓方法相比,可节省大量时间。阻碍水力学性能测量的另一个困难是缺乏在极低吸力(即0.01kPa至1kPa)下测量土壤-水特征曲线(SWCC)的适当技术。使用轴平移技术和水头控制方法开发了一种新设备。提出了一个新的解释方程,以减少由沿样品高度的吸力差引起的测试误差。使用新设备和新解释方程,可测量的吸力范围扩展到0.05 kPa 。;这两种新技术用于测量五种不同粗含量的土壤的水力特性。在SWCC中发现了典型的双峰特征,并且对具有较高粗度分数的间隙分级土壤渗透率函数进行了分析。相反,对于细粉含量高的土壤,单峰SWCC和渗透率函数很常见。提出了一种新的SWCC模型来表征双峰SWCC。该模型使用具有清晰物理意义的六个参数来描述双孔隙结构土壤中的排水过程。对文献中44例SWCC试验进行回归分析,以将这六个参数与土壤粒度分布和空隙率相关联。还提出了一种新的双峰渗透率函数模型。双峰渗流函数模型使用六个有意义的参数,其中包括来自双峰SWCC的三个吸力参数和使用经验方程估算的三个渗流参数。 5种不同粗度土壤组成的理想边坡的数值模拟。仿真结果表明,在高强度暴雨过程中,由高梯度的间隙梯度土壤组成的斜坡的浅层破坏很容易触发。

著录项

  • 作者

    Li, Xu.;

  • 作者单位

    Hong Kong University of Science and Technology (Hong Kong).;

  • 授予单位 Hong Kong University of Science and Technology (Hong Kong).;
  • 学科 Engineering Civil.
  • 学位 Ph.D.
  • 年度 2009
  • 页码 313 p.
  • 总页数 313
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 建筑科学;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号