The hydration of interstitial Portland cement phases in sodium hydroxide and magnesium sulfate solutions.

摘要

Formation of sulfoaluminate compounds was investigated by isothermal calorimetry and X-ray diffraction (XRD). Tricalcium aluminate/gypsum mixtures with a molar ratio of 1:1 sulfate-to-aluminate were hydrated at constant temperatures from 30 to 90°C; in de-ionized water, in 200mM and in 500mM sodium hydroxide (NaOH) solutions. Hydration in de-ionized water produced ettringite and monosulfate as the dominant crystalline phases, regardless of temperature. Complex assemblages of phases formed in 200mM and 500mM sodium hydroxide including ettringite, monosulfate and U-phase, at all temperatures. Hydration of monosulfate and gypsum was also carried out at constant temperatures from 30° to 80°C using de-ionized water and 0.2M, 0.5M, and 1.0M sodium hydroxide (NaOH) solutions. Ettringite was found to be the dominant crystalline phase over the entire temperature range and at all sodium hydroxide concentrations. A sodium-substituted monosulfate phase was formed as a hydration product in the 1.0M sodium hydroxide solution regardless of temperature.; Sulfoaluminate compounds formed by tricalcium aluminate hydration in magnesium sulfate solution were investigated by isothermal calorimetry, XRD, and scanning electron microscopy (SEM). Hydration was carried out in 0.5, 1.0 and 3.0M magnesium sulfate solutions and isothermally at temperatures from 30 to 80°C. Monosulfate, ettringite, gypsum and a hydrogarnet phase (Ca₃Al₂O₆·6H₂O) were all observed as hydration products. Monosulfate and hydrogarnet were the only phases observed for hydration in 0.5 and 1.0M magnesium sulfate solutions. Ettringite was the dominant crystalline phase after hydration in 3.0M solution, regardless of temperature. To investigate the rate of hydration, reactions at 60°C in 3.0M magnesium sulfate solution were quenched after 26 minutes, 73 minutes, 2.5 hours and 12 hours to establish the evolution of hydrated phases. Depending on hydration times ettringite, monosulfate, gypsum, hydrogarnet and residual tricalcium aluminate were observed. No crystalline magnesium-rich phases were detected by XRD.; The products formed by hydration of tetracalcium aluminoferrite (Ca ₂AlFeO₅) and magnesium sulfate solutions were investigated by isothermal calorimetry, XRD and SEM analyses. Hydration reactions were carried out isothermally at temperatures from 25 to 80°C in 0.25M, 0.5M, 1.0M, 2.0M, and 3.0M magnesium sulfate solutions. Gypsum was the initial hydration product in all magnesium sulfate concentrations and was the only crystalline hydration product in 2.0M and 3.0M magnesium sulfate solutions. Monosulfate was the dominant crystalline phase produced over the entire temperature range when hydration was carried out in magnesium sulfate concentrations between 0.25M and 1.0M. No crystalline phases incorporating iron were observed regardless of magnesium sulfate concentration or temperature. Hydration in 1.0M MgSO ₄ solution was more extensively investigated at 50°C. SEM observations indicated gypsum formed initially, consisting of fine particles (5 μm). Complex phase assemblages including gypsum, ettringite, and monosulfate were present at intermediate times. Monosulfate was the final crystalline hydration product. Amorphous solids produced include a calcium/iron-rich gel and a magnesium/aluminum/sulfate-rich phase. The calcium/iron-rich gel is the only iron-rich phase observed in the hydrated phase assemblage.