The effect of a single standard of engineering safety (S3E) on the airworthiness of military derivative aircraft.

摘要

Scope and method of study. The purpose of this experimental study was to examine the effects of applying a single standard of engineering safety (S3E) on the airworthiness of military derivative aircraft. For the purpose of this study, S3E is defined as the use of commercial standards for airworthiness in embodied in Federal Aviation Regulation (FAR) 121 and Federal Aviation Administration (FAA) Order 8300.10, then tailored and applied to the Department of Defense (DOD). Using a S3E audit normally used to inspect airlines but specially tailored to the military two randomly selected military units were pre-tested. Although the random selection was blind to the study it is known that the units were of different services but operated the same type of commercially built and certified military derivative aircraft. It is also known that their force of strength and fleet size were the same. After the pre-test, one unit was treated by exposure to S3E commercial standards for airworthiness per FAR Part 121 and FAA Order 8300.10 and the other unit was not. After 90 days, both units were post-tested. Percent change comparison on the pre and post test as well as the chi squared technique was used to analyze the data.; Findings and conclusions. The results of the study indicate that the treated unit experienced significant improvement in airworthiness compliance and the control unit did not. It was concluded that S3E had a positive effect in this first of its kind study, but further and expanded research needs to continue.